Installing The 4X 3.5-Inch Hdd Extension Box; Concluding Steps; Replacing The Ultraslim Odd; Preliminary Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Ê If the removed ultraslim ODD is not to be replaced by a new drive:
Ê Secure the locking latch to the ultraslim ODD with its two original screws
to the HDD cage (see figure 312).
Ê Insert the ultraslim ODD dummy cover (see figure 311).

12.6.2.4 Installing the 4x 3.5-inch HDD extension box

Ê Install the 4x 3.5-inch HDD extension box as described in section
the 4x 3.5-inch HDD extension box" on page

12.6.2.5 Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê

12.6.3 Replacing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.6.3.1 Preliminary steps

"Locating the defective server" on page 55
Ê
"Removing backup and optical disk media" on page 114
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
Accessible drives
247.
Hardware: 10 minutes
"Installing
425