Slimline Odd And Lsd In Multibay Box; Installing The Slimline Odd Or Lsd; Preliminary Steps; Installing The Slimline Odd - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Accessible drives and LSD
12.5

Slimline ODD and LSD in Multibay box

12.5.1 Installing the slimline ODD or LSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.5.1.1 Preliminary steps

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
I
The front cover only needs to be removed in order to remove or install
accessible drive dummy covers. If the Multibay box is already
installed in the server and will be removed in order to install a slimline
ODD or LSD module, the front cover can remain installed.
"Removing the system fan holder" on page 74
Ê
"Removing the Multibay box" on page 311
Ê

12.5.1.2 Installing the slimline ODD

Ê Press up on the locking tab to disengage the slimline ODD dummy module
as shown in figure 227 on page
Ê From inside the Multibay box, press out on the ODD dummy module and pull
it out of its bay.
304
312.
Upgrade and Maintenance Manual
Hardware: 10 minutes
(if applicable)
TX2540 M1