Installing Accessible Drives - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Accessible drives
12.2

Installing accessible drives

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
12.2.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers.
"Removing the system air duct" on page 67
Ê
Ê If applicable, "Removing the riser module" on page 84
Ê If applicable, remove the expansion card, see section
expansion card" on page
Ê Remove the fan bridge, see section
12.2.2 Removing accessible drive dummy covers
Ê Remove accessible drive filler covers from the required bays, see section
"Accessible drive filler covers" on page
Ê Remove the accessible drive covers, see section
on page 100.
376
318.
"Handling fan bridges" on page
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing an
98.
"Accessible drive covers"
90.
TX2550 M4