Removing The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Installing HDD modules into the 4x 3.5-inch HDD extension box
▶ Install HDD modules or HDD dummy modules into the additional HDD bays,
see "Installing 3.5-inch HDD modules" on page 177
inch HDD dummy module" on page
For detailed information on HDD mounting order, see
configurations" on page
Concluding steps
▶ Install the fan bridge, see
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page
7.6.6

Removing the 4x 3.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: tool-less
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
178.
172.
"Handling the fan bridge" on page
68.
68.
82.
83.
49.
Upgrade and Maintenance Manual
and "Removing a 3.5-
"3.5-inch HDD
92.
136. Select the
130.
Hardware: 10 minutes
Software: 10 minutes
107.
281