7.4.5.8
Concluding steps
"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Resuming BitLocker functionality" on page 136
Ê
"Switching on the server" on page 90
Ê
7.4.6
Removing the 4x 3.5-inch HDD extension box
Upgrade and Repair Unit
(URU)
Tools: tool-less
7.4.6.1
Preliminary steps
"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
Ê Remove all HDD modules from the HDD extension box as described in
section
"Removing 3.5-inch HDD modules" on page
"Getting access to the component" on page 61
Ê
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
7.4.6.2
Removing the 4x 3.5-inch HDD extension box
Ê Remove all cables from the 4x 3.5-inch HDD extension box backplane.
Ê If applicable, remove all cables from the slimline ODD.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
220.
100.
"Opening
251