Table of Contents
Advertisement
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
on page
Concluding steps
▶ If applicable, install the front bezel, see
page
47.
7.4
Removing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
Tools:
tool-less
Preliminary steps
▶ If applicable, remove the front bezel, see
page
48.
▶ If the HDD/SSD module to be removed is combined into a RAID array,
please proceed as follows:
CX400 M6
Hard disk drive (HDD) / solid state disk (SSD)
21.
Upgrade and Maintenance Manual
"Documentation overview"
"Installing the front bezel" on
Hardware: 5 minutes
"Removing the front bezel" on
115
Advertisement
Table of Contents
