Table of Contents
Advertisement
Figure 80: Installing a 2.5-inch HDD/SSD module
▶ Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
▶ Close the locking lever to lock the HDD/SSD module in place (2).
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
page
22.
Concluding steps
No steps needed.
7.6
Removing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
Tools:
tool-less
GX2560 M7
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
"Documentation overview" on
Hardware: 5 minutes
121
Advertisement
Table of Contents
