Hard disk drive (HDD) / solid state drive (SSD)
7.5.2.6
Installing HDD modules into the 8x 2.5-inch HDD/SSD extension
box
"Reassembling" on page 68
Ê
Ê Install HDD modules or HDD dummy modules into the additional HDD bays,
see sections
"Installing a 2.5-inch HDD/SSD module" on page 180
"Installing a 2.5-inch HDD/SSD dummy module" on page
I
For more information on HDD mounting order, see section
HDD/SSD configurations" on page
7.5.2.7
Concluding steps
Ê Install the fan bridge, see section
"Installing the system air duct" on page 68
Ê
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Resuming BitLocker functionality" on page 127
Ê
"Switching on the server" on page 82
Ê
7.5.3
Removing the 8x 2.5-inch HDD/SSD extension box
Upgrade and Repair Unit
(URU)
Tools: tool-less
7.5.3.1
Preliminary steps
"Suspending BitLocker functionality" on page 105
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
Ê Remove all HDD modules from the HDD/SSD extension box, see section
"Removing 2.5-inch HDD/SSD modules" on page
"Getting access to the component" on page 54
Ê
246
"Handling fan bridges" on page 90
Upgrade and Maintenance Manual
183.
166.
Hardware: 10 minutes
181.
and
"2.5-inch
TX2550 M4