Create Dm Network Interface Worksheet - EMC VNX VG2 Setup Manual

Create DM network
interface worksheet
Table 17
Data
Mover
number
The Create DM Network Interface step configures individual network interfaces for
the Data Movers. It can also create virtual network devices: Link aggregation, FSN,
and Ethernet Channel. This step can be repeated as needed to create more than one
interface. You will need the following information:
Does the customer's network use variable-length subnets?
❑ ❑
Yes No
Note: If the customer's network uses variable-length subnets, ensure the customer provides the
correct subnet mask. Do not assume 255.255.255.0 or other common values.
Create interface worksheet
Device name or
virtual device
name IP address
Maximum
Transmission
Unit (MTU)
Netmask (optional)
Setup Celerra wizard worksheets
EMC CONFIDENTIAL
Setup Worksheets
Virtual LAN
(VLAN)
identifier
(optional) Devices (optional)
293