EMC VNX VG2 Setup Manual page 259

If you are using a single switch to connect a CLARiiON CX3-20 or CX3-40 array,
connect the cables as shown in
SP B
0 Fibre 1 Fibre 0 Fibre 1 Fibre
Figure 166 CLARiiON CX3-20 or CX3-40 connected to a single switch
1. Connect SP A port 0 Fibre to the switch.
2. Connect SP B port 0 Fibre to the switch.
3. Connect SP A port 1 Fibre to the switch.
4. Connect SP B port 1 Fibre to the switch.
5. Record which SP ports you connected to which switch ports using the
cabling worksheet" on page
Note: If you did not use the default SP and FC switch cabling, you must manually select the FC
switch ports the array will use in
Cable Connections from Fibre Channel Switch to Storage
Figure
SP A
3
1
4
2
273.
"Step 2: Install latest File OE on CS 0" on page
Connecting a CLARiiON CX3-20 or CX3-40 array
EMC CONFIDENTIAL
166:
Switch
CIP-000725
"FC/FCoE
139.
259