Table of Contents
Advertisement
EMC CONFIDENTIAL
Change IP Addresses
184
EMC VNX VG2/VG8 Gateway Configuration Setup Guide
30. If the system output in
# ls /nasmcd/.nas_service_status
Example output (services not yet started):
# ls /nasmcd/.nas_service_status
/nasmcd/.nas_service_status
Example output (services started):
# ls /nasmcd/.nas_service_status
ls: /nasmcd/.nas_service_status: No such file or directory
If the file exists, NAS services have started.
31. Check the VG2/VG8 system status by using the nas_checkup command:
# /nas/bin/nas_checkup
step 29
includes a reason code of 10, run this command:
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VNX VG2 and is the answer not in the manual?