EMC VNX VG2 Setup Manual page 221

c. The Configure TCP/IP dialog box appears
tab to a checkbox and press Enter. Valid selections include:
– IPv4
or
– IPv4 and IPv6 (you must select both checkboxes!)
Tab to Ok and press Enter.
Configure TCP/IP
Figure 141
Note: If you select IPv4 and IPv6, you will be prompted to enter IP addresses in the
IPv6 format.
d. Enter the port IP address, netmask, default gateway IP address, and primary
nameserver IP address
Example of Configure TCP/IP window
Figure 142
The system displays the Configure Network dialog box
page
(Figure
222).
Express Install for File OE Release 7.1 or higher
EMC CONFIDENTIAL
(Figure 141). To make a selection,
142). Tab to Ok and press Enter.
NAS Install Options
(Figure 143 on
221