Step 7: Complete The Hand-Off Worksheet; Step 8: Final Configuration - EMC VNX VG2 Setup Manual

EMC CONFIDENTIAL
Install and Configure EMC NAS Software

Step 7: Complete the hand-off worksheet

Step 8: Final configuration

144 EMC VNX VG2/VG8 Gateway Configuration Setup Guide
Complete the "Phase 2 completion hand-off worksheet" on page 282
required information for Phase 3.
The third and final setup phase includes all of the configuration required to make the
VNX gateway available to clients. The specific steps depend on which services the
customer purchased:
If you are completing configuration for the customer, go to
◆
"Complete Phase 3 Installation."
phase of VNX configuration.
If you are not completing configuration for the customer, instruct the customer
◆
to keep all worksheets in a safe place. The individual who completes the VNX
configuration will require the completed worksheets.
This completes Phase 2 of the VNX system setup process.
This guide provides instructions for the final
to record all
Chapter 10,