EMC VNX VG2 Setup Manual page 13

Related
documentation
EMC E-Lab
Interoperability
Navigator
Conventions used in
this guide
!
Related documents include:
Technical modules on the Powerlink website at:
http://Powerlink.EMC.com
Configuring Standbys on Celerra
◆
Configuring and Managing Celerra Networking
◆
Configuring and Managing Celerra Network High Availability
◆
Celerra Network Server System Operations
◆
Technical documents on the Powerlink website:
EMC Rails and Enclosures (CX3-Series Storage Systems) Field Installation Guide
◆
EMC Rails and Enclosures (CX4-Series Storage Systems) Field Installation Guide
◆
EMC CX3-Series DC-Powered Enclosures for Telco Racks Installation and Operation
◆
Guide
EMC CLARiiON CX4-Series Hardware in NEBS-Compliant Environments Installation
◆
Guidelines
Celerra Network Server System Software Installation Guide
◆
Celerra Network Server System Configuration Guide
◆
Engineering White Paper EMC CLARiiON Best Practices for Fibre Channel Storage
◆
(Powerlink Only)
The EMC E-Lab Interoperability Navigator, which is available at
http://Powerlink.EMC.com, provides definitive information on supported software
and hardware, such as backup software, Fibre Channel switches, and application
support for VNX network-attached storage (NAS) products.
EMC E-Lab Interoperability Navigator
The
information with customers.
EMC uses the following conventions for notes, cautions, warnings, and danger
notices.
Note: A note presents information that is important, but not hazard-related.
CAUTION
A caution contains information essential to avoid data loss or damage to the system
or equipment. The caution may apply to hardware or software.
WARNING
A warning contains information essential to avoid a hazard that can cause severe
personal injury, death, or substantial property damage if you ignore the warning.
DANGER
A danger notice contains information essential to avoid a hazard that will cause
severe personal injury, death, or substantial property damage if you ignore the
message.
is for EMC/Partner use only. Do not share this
EMC VNX VG2/VG8 Gateway Configuration Setup Guide
EMC CONFIDENTIAL
Preface
13