FC/FCoE cabling worksheet
You will need the following information for zoning the FC/FCoE switches. Record
this information when you connect the Fibre Channel cables.
If you are connecting more than one array, make a copy of
each array.
Array Type
❑
Symmetrix (DMX, VMAX, or VMAXe)
❑
VNX
First Switch Username or ID (required)_________________________
First Switch Password (if required)_____________________________
First Switch Management IP Address (required)_________________
First Switch VSAN ID (Cisco switch only) ______________________
Second Switch Username or ID (optional) ______________________
Second Switch Password (optional) ____________________________
Second Switch Management Port (optional)_____________________
Second Switch VSAN ID (Cisco switch only)____________________
In
Table
12, fill in the numbers of the switch ports you actually connect to the blade
ports. You can optionally fill in the World Wide Names, or you can copy them directly
from the setup script output to a text file.
Note: If you are using the auto-config setup script, the WWNs are automatically collected and
zoned for the switch. You need not record the blade WWNs in
are prompted to do so.
Table 12
Port
Data Mover 2 BE 0
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____
Data Mover 2 BE 1
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 61 : _____ : _____ : _____ : _____
Data Mover 3 BE 0
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 68 : _____ : _____ : _____ : _____
Data Mover 3 BE 1
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 69 : _____ : _____ : _____ : _____
Data Mover 4 BE 0
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____
Data Mover 4 BE 1
Data Mover Fibre Channel cabling
Switch
❑
❑
st
1
❑
❑
st
1
❑
❑
st
1
❑
❑
st
1
❑
❑
st
1
❑
❑
st
1
FC/FCoE cabling worksheet
EMC CONFIDENTIAL
Setup Worksheets
Table 13 on page 275
Table 12 on page
273, unless you
Switch port
nd
2
_______________
nd
2
_______________
nd
2
_______________
nd
2
_______________
nd
2
_______________
nd
2
_______________
for
273
Need help?
Do you have a question about the VNX VG2 and is the answer not in the manual?