EMC VNX VG2 Setup Manual page 162

EMC CONFIDENTIAL
Complete Phase 3 Installation
162 EMC VNX VG2/VG8 Gateway Configuration Setup Guide
6. In the Group (Role) Membership field, specify the additional groups, and their
associated roles, to which the user belongs.
These groups can be one of the predefined groups or a custom-defined group.
Note: By default, a user is always assigned to the nasadmin group which is associated with
the role of operator, which means the user always has at least read privileges.
7. In the Client Access field, specify the type of access this user has to Celerra.
Possible values are:
• Control Station shell allowed – Allows the user to access the CLI
• XML API v2 allowed – Allows the user to access the XML API
• Unisphere allowed – Allows the user to access the Unisphere software
Note: When a local user account is created automatically for an LDAP domain-mapped
user, that new user is given access to the Unisphere software and the XML API by default.
8. Click OK to create the new user.