Appendix B Change Ip Addresses - EMC VNX VG2 Setup Manual

This appendix describes how to change the private IP addresses of the VNX gateway
after installation. However, the preferred method is to configure private IP addresses
during installation:
Change private IP addresses ..................................................................................... 174
◆
Change primary subnet.............................................................................................. 176
◆
Change secondary subnet .......................................................................................... 180
◆
Note: If you are required to change the private IP addresses of the VNX gateway from their
default values, you must use Class C subnets.
EMC CONFIDENTIAL
Change IP Addresses
Change IP Addresses
B
173