When To Change The Connecthome Dialing Configuration - EMC VNX VG2 Setup Manual

EMC CONFIDENTIAL
Change ConnectHome Dialing Configuration

When to change the ConnectHome dialing configuration

166 EMC VNX VG2/VG8 Gateway Configuration Setup Guide
The following lists the conditions for changing the ConnectHome dialing
configuration:
If the customer is outside the U.S. or Canada, change the CallHome telephone
◆
number.
If the customer-supplied telephone line does not use the prefix 9 to get an outside
◆
line, change the dialing prefix.
If the customer is located in a country that does not use the U.S.-style dial tone,
◆
such as Germany, disable dial tone detection on the CallHome modem.
If the customer has a MT5634ZBA modem (check the label on the bottom of the
◆
modem or on the box that the modem shipped in) you might need to run a special
utility to set the correct country/regional code.
Refer to "Setting the country code on the MT5634ZBA modem" on page 168
◆
detailed instructions on how to set the country/regional code on the MT5634ZBA
modem.
for