Setting The Country Code On The Mt5634Zba Modem; Windows-Based Pc Instructions - EMC VNX VG2 Setup Manual

EMC CONFIDENTIAL
Change ConnectHome Dialing Configuration

Setting the country code on the MT5634ZBA modem

Windows-based PC
instructions
Figure 100
168 EMC VNX VG2/VG8 Gateway Configuration Setup Guide
If the customer has a MT5634ZBA modem (check the label on the bottom of the
modem or on the box that the modem shipped in) you might need to run a special
utility to set the correct country/regional code. The modem ships with a default
value for the country/regional code. The default value might not be appropriate for
the location of the system.
If your service laptop is a Microsoft Windows-based PC, go to the
PC instructions."
If your service laptop is NOT a Microsoft Windows-based PC, go to the
instructions for setting the country code" on page
Note: If you need to verify the country/regional code that is configured on the modem, you
must use the manual instructions.
Set the regional code by using a utility named ZBAWizard.exe. This is an EMC
version of the vendor-supplied utility. To use the ZBAWizard.exe utility do the
following:
1. Download the latest version of the ZBAWizard.exe utility:
a. In a web browser on your service laptop go to the following Global Services
website:
http://www.cs.isus.EMC.com/
b. Click the Application Download Area hyperlink.
c. Click the Modem Information hyperlink.
d. Click the ZBA Global Modem Wizard hyperlink.
e. Click the ZBAWizard.exe hyperlink to download the executable.
f. Click Save and select a location on your service laptop to save the file. This
application will be run at a later step in the procedure.
2. Connect the serial cable from the modem to the service laptop.
Note: Ensure that the modem is powered up.
3. Using Windows Explorer on your service laptop, double-click the ZBAWizard.exe
file. A password prompt appears (see
Decryption password screen
"Windows-based
170.
Figure 100 on page 168).
"Manual