EMC VNX VG2 Setup Manual page 185

This appendix describes how to correct the following error by upgrading the software
on the VNX gateway or VNX array:
Backend Storage Requirements Check Failed
Introduction ................................................................................................................. 186
◆
Upgrade the operating environment........................................................................ 187
◆
Commit the operating environment......................................................................... 193
◆
Enable read and write cache...................................................................................... 194
◆
IMPORTANT
!
If the array is using a FLARE version prior to Release 30, you must use Navisphere
Manager (not Unisphere) to perform these tasks.
Manager procedures,"provides the instructions for performing required tasks by
using Navisphere Manager.
Requirements Check
Appendix I, "Navisphere
Backend Storage Requirements Check Failed Error
EMC CONFIDENTIAL
C
Backend Storage
Failed Error
185