Comtech EF Data SLM-5650B Installation And Operation Manual page 115

Front Panel Operation
CONFIG: Remote  EthernetConfig  SNMP  Communities
SNMP Communities: Read
Use the arrow keys to select Read or Write, and then press [ENT].
CONFIG: Remote  EthernetConfig  SNMP 
Communities  Read
SNMP Read Community:
public
Use thearrow keys to select the character to edit, and then use the
arrow keys to edit that character.
Only the first 20 characters on the bottom line are
available.
All printable ASCII characters are available with the exception of the
backslash '/' (ASCII code 92) and tilde '~' (ASCII code 126).
Once the string has been composed, press [ENT]. All trailing spaces are
removed from the Read Community string upon entry.
CONFIG: Remote  EthernetConfig  SNMP 
Communities  Write
SNMP Write Community:
private
Use the  arrow keys to select the character to edit, and then use the
arrow keys to edit that character.
Only the first 20 characters on the bottom line are
available.
All printable ASCII characters are available with the exception of the
backslash '/' (ASCII code 92) and tilde '~' (ASCII code 126).
Once the string has been composed, press [ENT]. All trailing spaces are
removed from the Write Community string upon entry.
CONFIG: Remote  EthernetConfig  SNMP  Traps
SNMP Traps: Address #1
Community
Use the arrow keys to select Address #1, Address #2, Community, or
Version, and then press [ENT].
Write
(E)
(E)
(E)
Address#2
Version (E)
5–31
SLM-5650B Satellite Modem
Revision 2
MN-SLM-5650B