Table of Contents
Advertisement
Command
Arguments for
Parameter
(Instruction
Command or
Code and
Response to
Type
Qualifier)
Rx Buffer Size
RBS=
8 bytes
ReCenter Buffer
RCB=
None
Rx Clock Invert
RCI=
1 byte
Rx Clock Source
RCK=
1 byte
Appendix C
Description of Arguments
Query
Command or Query.
Rx Buffer Size (in either bits or milliseconds, see RBM command),
where:
xxxxxxxx = Rx Buffer Size
Note: Commands as well as queries are not allowed when either the
GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: RBS = 00000512
Command only.
Forces the software to recenter the receive Plesiochronous / Doppler
buffer.
Note: This command is not allowed when either the GigaBit Ethernet
or NP card has been selected as the current interface type.
Example: RCB= (ReCenter buffer)
Command or Query.
Invert Receive Clock in the form x, where:
0 = Normal
1 = Inverted
Example: RCI = 1 (selects Inverted RX Clock)
Command or Query.
Rx Clock Source, where:
0 = Rx Satellite
1 = Internal
2 = Tx-Terrestrial
3 = External Clock (only valid with the G.703 Option Card)
Note: Commands as well as queries are not allowed when either the
GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: RCK = 2 (selects Tx-Terrestrial)
RBS=
RBS?
RBS*
RBS#
RCB=
RCB?
RCB*
RCB#
RCI =
RCI?
RCI*
RCI#
RCK=
RCK?
RCK*
RCK#
C–25
SLM-5650B Satellite Modem
Query
Response to
Response to
(Instruction
Command
Code and
Qualifier)
RBS?
RBS=xxxxxxxx
(see Description
of Arguments)
N/A
N/A
RCI?
RCI=x
(see Description
of Arguments)
RCK?
RCK=x
(see Description
of Arguments)
MN-SLM-5650B
Revision 2
Query
Advertisement
Table of Contents
