5.2.7 Select: Utility; Utility: Rt-Clk; Utility: Refadjust; Utility: Id - Comtech EF Data SLM-5650B Installation And Operation Manual

5.2.7 SELECT: Utility

UTIL: RT-Clk RefAdjust ID Display
Agc Alarm Firmware FAST (E)
Use the arrow keys to select RT-Clk, RefAdjust, ID, Display, Temp, Agc, Alarm, Alarm,
Firmware, or FAST, and then press [ENT].
5.2.7.1

Utility: RT-Clk

RT-Clk:
Use the  arrow keys to select and set the Real-Time Clock. Hours are in 24 hour time
(HH:MM:SS) format. The date is shown in DAY/MONTH/YEAR format in accordance with
European format.
5.2.7.2

Utility: RefAdjust

Internal 10 MHz Ref Freq
Fine Adjust: 3F3
Use the  arrow keys to select and adjust the internal high stability 10 MHz oscillator
to counteract aging. The control value is in hex – not decimal – and has a range of 000 to
FFF. The typical calibration point for a modem is nominally around 400.
5.2.7.3

Utility: ID

Edit Circuit ID:
------------------------
Use the  arrow keys to name the communications link. This name can be any
combination of alphanumeric characters up to 24 characters in length.
Additional characters supported are: ( ) * + / . (period) , (comma) and space.
5.2.7.4

Utility: Display

Edit Display Brightness:
100%
Use the  arrow keys to adjust the front panel display brightness. Valid settings are 25%,
50%, 75% or 100%.
Front Panel Operation
Time: 14:29:10
Date: 19/06/17
Temp
(E)
(E)
(E)
(E)
5–42
SLM-5650B Satellite Modem
Revision 2
MN-SLM-5650B