Comtech EF Data SLM-5650B Installation And Operation Manual page 388

Command
Arguments for
Parameter
(Instruction Command or
Code and
Type
Qualifier)
Rx Ternary RTC= 1 byte
Code
Receive T1 T1F= 1 byte
Framing
Receive T2 T2F= 1 byte
Framing
Appendix C
Description of Arguments
Response to
Query
Command or Query.
Rx Ternary Code, where:
0 = AMI
1 = B8ZS
2 = B6ZS
3 = HDB3
Example: RTC = 3 (Set Rx Ternary Code to HDB3)
Command or Query.
Receive T1 Framing, where:
0 = None
1 = G.704
Note: Commands as well as queries are not allowed when either
the GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: T1F = 0
Command or Query.
Receive T2 Framing, where:
0 = None
1 = G.704
2 = Reserved
3 = G.743
4 = Reserved
5 = G.747
Note: Commands as well as queries are not allowed when either
the GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: T2F = 0
Response to
Command
RTC=
RTC?
RTC*
RTC#
T1F=
T1F?
T1F*
T1F#
T2F=
T2F?
T2F*
T2F#
C–60
SLM-5650B Satellite Modem
Revision 2
Query
(Instruction
Response to Query
Code and
Qualifier)
RTC? RTC=x
(see Description
of Arguments)
T1F? T1F=x
(see Description
of Arguments)
T2F? T2F=x
(see Description
of Arguments)
MN-SLM-5650B