Comtech EF Data SLM-5650B Installation And Operation Manual page 385

Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Qualifier)
Retrieve next 5 N/A 155 bytes
unread AUPC
Log Entries
AUPC Remote RCL= 1 byte
Carrier Loss
Action
Remote Modem RPB= 1 byte
Pattern
Substitution
Appendix C
Description of Arguments
Query
Query only.
Unit returns the oldest 5 AUPC Log Entries which have not yet
been read over the remote control.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}
Sub-body{CR}Sub-body, where Sub-body=
AA.ABB.BCCC.CEEE.Eddmmyyhhmmss:
AA.A = Minimum Eb/No during sample period.
BB.B = Average Eb/No during sample period.
CCC.C = Max Output Power during sample period.
EEE.E = Average Output Power during sample period.
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros. If there are no new events, the
response is RNA*.
Command or Query.
Tx Output Power level setting when remote carrier is lost, where:
0 = Hold current output power level
1 = Goto Nominal output power level
2 = Goto Maximum output power level
Example: RCL = 0
Command or Query.
Remote Modem Tx Pattern Substitution, where:
0 = Off
1 = On
Note: For compatibility reasons, only the 2047 Tx pattern can be
turned On or Off at the remote modem.
Example: RPB = 1 (Turn on remote modem AUPC Control)
Response to
Command
N/A
RCL=
RCL?
RCL*
RCL#
RPB=
RPB?
RPB*
RPB#
C–57
SLM-5650B Satellite Modem
Revision 2
Query
Response to
(Instruction
Query
Code and
Qualifier)
RNA? RNA=
{CR}AA.ABB.BCCC
.CEEE.Eddmmyyhh
mmss{CR}
AA.ABB.BCCC.CE
EE.Eddmmyyhhmm
ss{CR}AA.ABB.BC
CC
.CEEE.Eddmmyyhh
mmss{CR}AA.ABB.
BCCC.CEEE.Eddm
myyh
hmmss{CR}AA.ABB
.BCCC.CEEE.Eddm
myyhhmmss
(see Description of
Arguments)
RCL? RCL=x
(see Description of
Arguments)
RPB? RPB=x
(see Description of
Arguments)
MN-SLM-5650B