Comtech EF Data SLM-5650B Installation And Operation Manual page 392

Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Qualifier)
Modem IP MIS= 1 byte
Interface
Security Mode
Router IP RIM= 1 byte
Address Mode
Router Ethernet
RIP= 18 bytes
Interface Traffic
IP Address and
Range
Appendix C
Description of Arguments
Query
Command or Query.
Used to set the modem IP Interface security level where:
0 = Normal or Low Level Security
1 = High Level Security
Example: MIS = 0
Command or Query.
Used to set the NP Card's IP address mode where:
0 = Single IP Address
1 = Dual IP Address
Example: RIM = 0
Command or Query.
Used to set the IP address and network prefix for the
NP Interface Traffic port, in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address
ee = network prefix (0-31)
Example: RIP = 010.006.030.001.24
Response to
Command
MIS=
MIS?
MIS*
MIS#
RIM=
RIM?
RIM*
RIM#
RIP=
RIP?
RIP*
RIP#
C–64
SLM-5650B Satellite Modem
Revision 2
Query
(Instruction
Response to Query
Code and
Qualifier)
MIS? MIS=a
(see Description of
Arguments)
RIM? RIM=a
(see Description of
Arguments)
RIP? RIP=aaa.bbb.ccc.ddd.ee
(see Description of
Arguments)
MN-SLM-5650B