Table of Contents
Advertisement
Command
Arguments for
Parameter
(Instruction
Command or
Code and
Response to
Type
Qualifier)
CnC-APC FER
AFR=
None
Reset
CnC-APC
APC=
1 byte
Activate/
Suspend
CnC-APC Max
APL=
3 bytes
Power Level
Increase
CnC-APC State
N/A
2 bytes
Appendix C
Description of Arguments
Query
Command only.
This command takes no arguments. Forces restart of the CnC-
APC FER measurement.
Example: AFR=
Command only.
Used to activate or suspend APC operation, in format APC-x,
where:
0 = No Action
1 = Activate APC
2 = Suspend APC
Example: APC = 1 (Activate APC)
Command or Query.
CnC-APC maximum power level increase in form x.x, range from
0.0 to 9.9 dB, limited by Tx power level.
Example: APL = 3.9 (APC max power level increase is 3.9 dB)
Query only.
Returns the state of APC operation. Return value is in form xx,
where:
00 = APC is not active
01 = No Solution
02 = OK – ReBalance Done
03 = OK(Partial) – CnC Ratio approaches limit
04 = OK(Partial) – Local power approaches minimum value (IF)
05 = OK(Partial) – Local power approaches minimum value (L-
Band)
06 = OK(Partial) – Local power approaches maximum value
07 = OK(Partial) – Local power approaches limit set by max
power level increase
08 = OK(Partial) – Distant power approaches minimum value
Response to
Command
AFR=
AFR?
AFR*
AFR#
APC=
APC?
APC*
APC#
APL=
APL?
APL*
APL#
N/A
C–32
SLM-5650B Satellite Modem
Revision 2
Query
Response to
(Instruction
Query
Code and
Qualifier)
N/A
N/A
N/A
N/A
APL?
APL=x.x
(see Description
of Arguments)
APS?
APS=xx
(see Description
of Arguments)
MN-SLM-5650B
Advertisement
Table of Contents
