Controls And Indicators; Ontrols And Ndicators; Figure 3 5. Rfpc Front Panel Controls, Indicators, And Connectors - Ametek Elgar ReFlex Power Operation Manual

ReFlex Power™ Controller
C
3.5.1
ONTROLS AND
Figure 3-5. RFPC Front Panel Controls, Indicators, and Connectors
1 Power – green LED indicates Controller power is On.
2 Fault – Red LED indicates either the Controller or any power module has
detected a high level system fault.
3 Bus - Green LED indicates Controller internal communication is in
process.
4 Interface connector providing hardware interface for remote isolated
digital control signals. Refer to Section 3.4.8 for connector information.
5 LAN Rst – Recessed pushbutton to reset the Controller to the LXI LAN
default requirements.
3-18
I
NDICATORS
ReFlex Power™
M380056-01 Rev L