Table 2 4. J5 Ac/Dc Input Connector Pinout; Table 2 5. Gnd, Safety Ground Stud; Figure 2 7. J5 Ac/Dc Input Connector, Mainframe Rear Panel View - Ametek Elgar ReFlex Power Operation Manual

Mainframe
Bill of Material
AMETEK
Item Description
Part No.
Conn, 7P, 8AWG,
1 855-130-02
Plug, P-Earth, S
Conn, Cable Clamp,
2 855-16A-X3
SS 24/28 w/Bushing
Cable, 10AWG X
3 890-887-07
7W, 600V, 80C
WARNING
A separate, dedicated safety ground wire must be connected to the
Mainframe rear panel safety ground stud. Operating the ReFlex Power™
system with the safety ground wire disconnected could result in a shock
hazard.
Figure 2-7. J5 AC/DC Input Connector, Mainframe Rear Panel View
Table 2-4. J5 AC/DC Input Connector Pinout
Pin
F L1
E L1-RTN
A L2
G L2-RTN
B L3
C L3-RTN
D CHAS-GND
Table 2-5. GND, Safety Ground Stud
Pin Name
E1 GND
M
AINFRAME
The digital control connectors, DIGITAL CTRL IN (J2) and DIGITAL CTRL
OUT (J1), and the analog control connectors, ANALOG CTRL IN (J4) and
ANALOG CTRL OUT (J3), provide a signal interface for multi-Mainframe
2-20
Manufacturer Part
Qty
1 DL3106A24-10S
M85049/41-16A, or
1
MS3057-16A
2m 87707
Name Function
Input: line-1
Input: return for line-1
Input: line-2
Input: return for line-2
Input: line-3
Input: return for line-3
Safety ground
Function
Chassis safety ground; 8-32 stud
I C
NTERCONNECT ONNECTORS
Manufacturer
No.
Amphenol
ITT Cannon, Amphenol /
Bendix
Alpha Wire & Cable
90-264VAC; 210-300VDC
90-264VAC; 210-300VDC
90-264VAC; 210-300VDC
90-264VAC; 210-300VDC
90-264VAC; 210-300VDC
90-264VAC; 210-300VDC
Chassis ground
Chassis ground
ReFlex Power™
Suggested Source(s)
Arrow Electronics:
http://www.arrownac.com/
Newark: http://www.newark.com/
PEI-Genesis:
http://www.pei-genesis.com/
Alpha Wire Company:
http://www.alphawire.com/index.cfm
Industrial Electric Wire & Cable:
http://www.iewc.com
Signal Level
Signal Level
M380056-01 Rev L