Ametek Elgar ReFlex Power Operation Manual page 166

ReFlex Power™
27. Send the system error query command to make sure calibration was successful.
28. If there is no error returned at the system error query command then save the
calibration result with the following commands
29. Reset the unit
M380056-01 Rev L
CAL<n>:OUTP:FREQ:CALC
SYST:ERR?
CAL<n>:UNLOCK "6867"
CAL<n>:STORE
CAL<n>:LOCK
*RST<n>
AC Power Supplies
4-81