Controls And Indicators; Ontrols And Indicators; Figure 4 8. Acps Front Panel - Ametek Elgar ReFlex Power Operation Manual

ReFlex Power™
C
4.5.1
ONTROLS AND
The ACPS has no controls. Figure 4-8 shows the front panel indicators and
connector interfaces.
1 Operational Status Indicators:
OUTPUT (LED, green): output enabled and isolation relay closed
POWER (LED, green): input AC/DC power applied to module
FAULT (LED, red):
BUS (LED, green):
2 User Interface Connector: connector for isolated discrete digital control
interface, or the optional isolated analog interface.
3 Output Connector: connector for making output and remote sense
connections to the user load.
4 Mounting screws: Captive fasteners to secure the module to the
Mainframe.
M380056-01 Rev L
I
NDICATORS
Figure 4-8. ACPS Front Panel
internal abnormal operating condition detected;
output disabled and isolation relay opened
Internal bus communication established
AC Power Supplies
4-29