Onnectors - Ametek Elgar ReFlex Power Operation Manual

ReFlex Power™ Controller
C
3.4.8

ONNECTORS

The ReFlex Power™ Controller module has all user interface connectors located
on the front panel. Two connectors are provided: the host LAN RJ-45, and the
control signal interface is a 15-Pin D-Subminiature female.
WARNING
To prevent electrical shock, disconnect the AC/DC input
service before making any connections to the module.
U I
SER NTERFACE
Mating Connector Kit
ReFlex Power™ Controller (RFPC) Mating Connector Kit - AMETEK Part No.
5380269-01, mates with RFP-C1LAN-0000-XXXX, and includes the following:
Bill of Material
AMETEK
Item
Part No.
Plug, RJ45, ¼ Turn,
1 856-993-07
26482, NI
Conn, 15P, DSUB,
2 856-918-15
20AWG, Crimp, Male
3 856-975-16 Conn, Backshell, 15P
R
ECOMMENDED
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02
3-14
Description Qty
1
1
1
T (
OOLS NOT INCLUDED WITH MATING CONNECTOR KIT
Manufacturer
Manufacturer
Part No.
RJF6MN Amphenol Socapex
SD15M1000Z Positronic Industries
D15000Z00 Positronic Industries
ReFlex Power™
Suggested Source(s)
PEI-Genesis:
http://www.pei-
genesis.com/
Arrow Electronics:
http://www.arrownac.com/
Positronic Ind.
http://www.connectpositro
nic.com/default.cfm
Positronic Ind.
http://www.connectpositro
nic.com/default.cfm
)
M380056-01 Rev L