Ontrols And Ndicators; Figure 5 7. Fpdc Indicators And Connectors - Ametek Elgar ReFlex Power Operation Manual

Fixed Power DC Power Supply
signals are available for dedicated hardware interface. All connectors for control
and power interface are accessible on the front panel
C
5.5.1
ONTROLS AND
1 – Output Indicator: Green LED lights when output voltages are enabled or isolation relays
are closed
2 – Power Indicator: Green LED lights when AC/DC input power is applied to the module.
3 – Fault Indicator: Red LED lights when an abnormal internal operating condition has been
detected; the output would be disabled and the isolation relay opened.
4 – Bus Indicator: Green LED lights when internal inter-module communications has been
established.
5 – User Interface Connector for remote isolated digital enable signal.
6 – DC Output connector for the output voltages and remote sense.
5-24
I
NDICATORS
Figure 5-7. FPDC Indicators and Connectors
ReFlex Power™
M380056-01 Rev L