Table of Contents
Advertisement
ReFlex Power™
•
•
•
•
ACCESSORIES LIST
7.2.2
The ReFlex Power™ Load modules include the following standard accessories:
•
•
CONTROLS AND INDICATORS
7.2.3
The Active Load modules operate within the ReFlex Power™ system as part of
an automated test system, so there are no user manual controls. They rely on
the
Mainframe
communications, and for input/output connections to the user application. All
input source connections and discrete control interface to the user application are
accessible on the front panel of the modules (Figure 7-1 and Figure 7-2). Also,
the front panel has LEDs to indicate the module's operational state. Input power
is routed from the Mainframe through a backplane distribution (see Figure 7-3 for
a view of the module rear panel connector interface).
M380056-01 Rev L
Web server
Optional Isolated Remote Analog Control, uses 16 bit digital interface
Integral Active Damper (for stable operation with inductive sources)
Surge power SOA protection envelope
Operation Manual, P/N M380056-01 (this manual)
Programming Manual, P/N M380056-03Quick Reference Guide, P/N M380056-
04
and
Controller
module
for
control,
Active Loads
status
and
data
7-3
Advertisement
Table of Contents
