Table of Contents
Advertisement
ReFlex Power™ Controller
SPECIFICATIONS
3.3
Performance specifications are valid at 25 °C, +/- 5 °C.
Power On Sequence: Manually operated switch.
Power Off Sequence: Manually operated switch for a controlled power off
S
3.3.1
UPERVISORY
O
VERTEMPERATURE
Overtemperature protection is implemented with protection monitors that
sense excessive internal operating temperature, and will turn off all the
modules. The maximum internal temperature is typically 85 °C.
G
3.3.2
ENERAL
I
V
NPUT
103.5-253VAC with AC input; 270VDC, nominal; 210VDC, minimum to
300VDC, maximum; 314VDC, maximum for 2s; 364.5VDC, maximum for
450ms
I
C
NPUT
Single-phase AC input; unipolar DC input; sinusoidal current with AC
input; continuous DC current with DC input.
At 103.5 VAC input, less than 1.7A
than 1.3A
200mA RMS steady state.
I
3.3.3
NPUT
RJ-45 – host LAN
15-pin D-Subminiature female – control signal interface
3-6
sequence, or a Remote Inhibit to do an immediate
power module output-off sequence.
C
HARACTERISTICS
C
HARACTERISTICS
R
OLTAGE
ANGE
URRENT
surge when RFPC power switch is turned on and less than
pk
/O
C
UTPUT
ONNECTIONS
. surge at AC power application; less
pk
ReFlex Power™
M380056-01 Rev L
Advertisement
Table of Contents
