Ametek Elgar ReFlex Power Operation Manual page 294

ReFlex Power™
the AC input leakage current could exceed 3.5mA, a second safety
ground connection is required. It should be connected to the safety
ground stud on the rear panel of the Mainframe.
WARNING
A separate, dedicated safety ground wire must be connected to the
Mainframe rear panel safety ground stud. Operating the ReFlex Power™
system with the safety ground wire disconnected could result in a shock
hazard.
M C
ATING ONNECTOR
Load (HPAL/LPAL) Mating Connector Kit - AMETEK Part No. 5380273-01, mates
with RFP-L3500-375-XXXX and RFP-L3500-750-XXXX, and includes the
following for both the Interface and DC Input connectors:
Bill of Material
AMETEK
Item Description
Part No.
Conn, 4P, 8/16AWG, Plug,
1 855-363-08
SR, Skt
Conn, 9P, DSUB, 20-
2 856-214-09
24AWG, Crimp, Male
Conn, Backshell, 9P,
3 856-247-10
DSUB, 2 PC
R
ECOMMENDED
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02
I
NTERFACE
The user Interface connector (see Figure 7-6 with wiring diagram) provides
terminations for external connections to digital and analog control signals (see
Table 7-2 for pinouts).
Connector: Positronic Industries P/N SD9M1000Z, AMETEK P/N 856-214-09
Backshell: Positronic Industries P/N D9000Z00, AMETEK P/N 856-247-10
Wire size: Maximum gauge 20 AWG (22 AWG recommended)
M380056-01 Rev L
K
IT
Manufacturer
Qty
1 MS3106F-20-24S
1 SD9M1000Z
1 D9000Z00
T (N I
OOLS OT NCLUDED WITH
C
ONNECTOR
Crimp contacts: Positronic Industries P/N MC7520D (initially supplied with connector)
Maximum length 10 meters.
Manufacturer
Part No.
Amphenol,
ITT Cannon
Positronic Industries
Positronic Industries
M C
ATING ONNECTOR
Active Loads
Suggested Source(s)
PEI-Genesis: http://www.pei-genesis.com/
Arrow Electronics:
http://www.arrownac.com/
Positronic Ind.
http://www.connectpositronic.com/default.cfm
Positronic Ind.
http://www.connectpositronic.com/default.cfm
K )
IT
7-19