Ametek Elgar ReFlex Power Operation Manual page 233

DC Power Supplies
O
PTIONAL
•
AMETEK P/N 5380508-01, 9-pin Loop-back Connector Assembly. Includes a
jumper wire between Pins 1 and 6 to enable the module outputs.
•
AMETEK P/N 5380443-01, Power Module, 9ft. Unterminated Interface Cable
Assembly. Use when interfacing to an external system.
•
AMETEK P/N 5380443-03, Power Module, Right Angle, 9ft. Unterminated
Interface Cable Assembly. Use when interfacing to an external system.
RFP-D2050-025-XXXX, RFP-D2050-020-XXXX M
HPDC-50V Mating Connector Kit - AMETEK Part No. 5380271-01, mates with
RFP-D2050-025-XXXX, RFP-D2050-020-XXXX and includes the following for
both Interface and DC Output connectors:
Bill of Material
AMETEK
Item Description
Part No.
Conn, 21P, DSUB,
1 856-214-04
8/20AWG, Male
Contact, 10AWG, 30A,
2 856-745-51
CL ETRY, Male
Conn, Backshell, 37P,
3 856-247-39
Strt, 2 PC
Conn, 9P, DSUB, 20-
4 856-214-09
24AWG, Crimp, Male
Conn, Backshell, 9P,
5 856-247-10
DSUB, 2 PC
R
ECOMMENDED
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-0-2
Insertion/extraction: Positronic Industries P/N M81969/1-02
Insertion/extraction Positronic Industries P/N 4311-0-0-0
6-30
I C
NTERFACE ONNECTOR
Manufacturer
Qty
Part No.
1 CBC21WA4M1000Z Positronic Industries
4 MC4010D
1 D37000Z00
1 SD9M1000Z
1 D9000Z00
T (
OOLS NOT INCLUDED WITH
A
CCESSORIES
ATING
Manufacturer
Positronic Industries
Positronic Industries
Positronic Industries
Positronic Industries
M C
ATING ONNECTOR KIT
C K
ONNECTOR IT
Suggested Source(s)
Positronic Ind.
http://www.connectpositronic.com/default.cfm
Positronic Ind.
http://www.connectpositronic.com/default.cfm
Positronic Ind.
http://www.connectpositronic.com/default.cfm
Positronic Ind.
http://www.connectpositronic.com/default.cfm
Positronic Ind.
http://www.connectpositronic.com/default.cfm
)
M380056-01 Rev L
ReFlex Power™