Table of Contents
Advertisement
Mainframe
adaptable. The modules feature the capability to be connected in configurations
such as series, parallel, and multi-phase to expand the voltage, current, and
power ratings beyond that of individual modules, minimizing the number of
unique assets comprising a system. For larger systems, the number of modules
could be further increased by interconnecting several Mainframes with external
controls/communications cables. Systems comprising eight Mainframes and up
to a maximum of nine-six modules could be produced.
The enclosure complies with industry-standard EIA rack mount requirements.
Front mounting flanges are provided, as well as a hole pattern on the chassis
that would accept rack slides or mounting rails. The thermal management has
been driven by the requirement to allow the dissipation of high power in a small
package, from supplies as well as active loads. Each module has integral fans,
optimized for the amount of heat that must be eliminated; no fans are required in
the Mainframe. Air intake is at the front of the modules, while the exhaust is at
the rear.
G
2.2.1
ENERAL
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2-2
F
EATURES
High module count, up to twelve single-width
Accepts single-width, double-width, triple-width modules
System extensible up to eight Mainframes and ninety-six modules
Configuration flexibility, no restrictions on module slot location
High power per slot, up to 1kW
High aggregate output power, up to 6,000W
Universal inputs: AC (50/60 Hz, 400 Hz), DC, single-phase, three-
phase
Auto-Termination communications bus
Auto-Configuration backplane controls bus
Small size, 7" H x 19" W x 17" D
Light weight, 11.6 lb
EIA RS-310 rack mount, 4U enclosure
Front entry modules
Modules mount with captive fasteners
Ruggedized to MIL-PRF-28800F
Corrosion-Resistant aluminum chassis
ReFlex Power™
M380056-01 Rev L
Advertisement
Table of Contents
