Primary Settings Menu - ABB ACS580 Firmware Manual

40 Settings, I/O and diagnostics on the control panel

Primary settings menu

To go the Primary settings menu from the Home view, select Menu - Primary
settings.
The Primary settings menu s you to adjust and define additional settings used in the
drive.
After making the guided settings using the first start assistant, we recommend that
you make at least these additional settings:
• Select a Macro or set Start, stop, reference values
• Ramps
• Limits
With the Primary settings menu, you can also adjust settings related to the motor,
PID, fieldbus, advanced functions and clock, region and display. In addition, you can
reset the fault and event logs, panel Home view, parameters not related to hardware,
fieldbus settings, motor data and ID run results, all parameters, end user texts as well
as reset everything to factory defaults. Note that the Primary settings menu only s
you to modify some of the settings: more advanced configuration is done via the
parameters: Select Menu - Parameters. For more information on the different
parameters, see chapter
In the Setting menu, the
The symbol indicates that the setting provides an assistant when modifying the
parameters.
To get more information on Primary settings menu items, press the
the help page.
Parameters on page 143.
symbol indicates multiple connected signals/parameters.
key to open
?