Suzuki Wagon R Manual page 1988

2) Install caliper (1) and tighten caliper pin bolts (2) to specifica-
tion.
NOTE:
Make sure that boots (3) are fit into groove securely.
Tightening torque
Caliper pin bolt (a): 30 N·m (3.0 kg-m, 22.0 lb-ft)
3) Tighten front wheel bolts to specification.
Tightening torque
Wheel bolt (b): 95 N·m (9.5 kg-m, 69.0 lb-ft)
4) Upon completion of installation, perform brake test.
Front Disc Brake Caliper
Installation
CAUTION:
Observe CAUTION at the beginning of On-Vehicle Ser-
vice.
1) Install caliper (1) to caliper carrier (2).
2) Torque caliper pin bolts (3) to specifications.
NOTE:
Make sure that boots are fit into groove securely.
Tightening torque
Caliper pin bolt (a): 30 N
3) Install brake flexible hose (1) and new gaskets (3) as shown
and torque hose bolt (2) to specification.
Tightening torque
Flexible hose bolt (b): 23 N
FRONT BRAKE 5B-3
·
m (3.0 kg-m, 22.0 lb-ft)
·
m (2.3 kg-m, 17.0 lb-ft)