Executing Control Commands - IDK MSD-5401 User Manual

7.4 Executing Control Commands

You can register up to nine control commands in MSD (COMMANDs A to I), but you can execute only five
commands (COMMANDs A to E) with control front panel command execution keys. To execute COMMANDs
F to I, perform "8.12.4 Command execution" or use RS-232C, LAN, or parallel input.
For COMMANDs A to I, nothing is registered by the factory default, so those keys will not work until their
commands are registered in "8.12.3 Command link".
Command control: Controlling command execution: @EXC
To execute commands associated with Control Command execution keys (COMMANDs A to E):
■ Procedure
Select the desired command from the Control command execution keys.
1
Execute the registered command from the control command keys.
2
DIGITAL
DISPLAY
POWER
MULTI
SWITCHER
1
2
POWER
3
ON
OFF
4
IN1 IN2 IN3 IN4 IN5
[Figure 7.4] Keys for command execution
IN6 IN7 IN8 IN9 OFF
Operation mode key
27
OUT1
COMMAND COMMAND COMMAND COMMAND
A B C D
OUT2
OUT3 MENU/SET
COMMAND
PRESET LOAD
OUT4 ESC
SWITCHING MODE
V&A VIDEO AUDIO
Control command keys
MSD-5404
COMMAND
E