IDK MSD-702UHD User Manual
  1. Manuals
  2. Brands
  3. IDK Manuals
  4. Switch
  5. MSD-702UHD
  6. User manual

IDK MSD-702UHD User Manual

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-702UHD:
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for choosing our product.
To ensure the best performance of this product, please read this User's Guide fully and carefully
before using it and keep this manual together with the product for reference as needed.
4K@60 and HDCP 2.2 supported Digital Multi Switcher
MSD-701UHD / 702UHD
MSD-801UHD / 802UHD
IDK Corporation
<User's Guide>
Ver.1.1.0

Advertisement

Table of Contents
loading

Related Manuals for IDK MSD-702UHD

Summary of Contents for IDK MSD-702UHD

  • Page 1 Thank you for choosing our product.  To ensure the best performance of this product, please read this User’s Guide fully and carefully before using it and keep this manual together with the product for reference as needed. IDK Corporation...
  • Page 2 PJLink is a trademark in Japan, the United States, and other countries/regions.  The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan.  All other company and product names mentioned in this manual are either registered trademarks or...
  • Page 3  Some of the contents in this User’s Guide such as appearance diagrams, menu operations, communication commands, and so on may differ depending on the version of the product.  This User’s Guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...

  • Page 4: Safety Instructions

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Safety Instructions Read and understand all safety and operating instructions before using this product. Follow all instructions and cautions as detailed in this document. Enforcement Symbol Description Indicates the presence of a hazard that may result in death or serious Warning personal injury if the warning is ignored or the product is handled incorrectly.
  • Page 5 Do not repair, modify or disassemble. Since the product includes circuitry that uses potentially lethal, high voltage levels, disassembly by unauthorized personnel may lead to the risk of fire or electric shock. For internal inspection or repair, contact your IDK representative.
  • Page 6 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Caution Do not place the product in any place where it will be subjected to high temperatures. If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the product’s performance and reliability and may increase the risk of fire.

  • Page 7: Table Of Contents

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Table of Contents About this Guide ..........................11 Included Items .............................12 Product outline ............................13 Features ..............................14 Panels ..............................15 Front panel .............................15 Rear panel............................16 System configuration example ......................18 Precautions ............................19 Installation ............................19 Cabling ............................20 7.2.1 Cables ............................21 7.2.2...
  • Page 8 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.5.1 Sharpness ..........................54 9.5.2 Brightness ..........................54 9.5.3 Contrast ..........................54 9.5.4 HUE ............................55 9.5.5 Saturation ..........................55 9.5.6 Black level ..........................55 9.5.7 Gamma ...........................55 9.5.8 Default color ..........................56 Input settings ..........................57 9.6.1 No-signal input monitoring .......................57 9.6.2 Input HDCP setting .........................58 9.6.3...
  • Page 9 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.7 Audio output connector......................80 9.9.8 Digital audio output connector ....................80 9.9.9 Multi channel audio output .......................80 9.9.10 Multi channel audio output priority ...................81 9.9.11 Test tone ..........................82 9.10 EDID (Extended Display Identification Data) ...................83 9.10.1 EDID ............................83 9.10.2 Resolution for PCs ........................84 9.10.3 Input resolution for AV devices ....................86...
  • Page 10 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.16.1 DISPLAY POWER keys ......................122 9.16.2 Key function lock ........................123 9.17 Other settings ..........................124 9.17.1 Grouping key function lock ....................124 9.17.2 Buzzer ..........................125 9.17.3 Power saving ........................125 9.17.4 DISPLAY POWER key pressing time ..................125 9.17.5 HDBaseT input power supply ....................125 9.17.6 Top page..........................126 9.17.7 Input signal status .........................127...

  • Page 11: About This Guide

    Since descriptions in this document are for MSD-802UHD, there may be slight differences between the model and other models. [Table 1.1] Main differences among MSD-701UHD / 702UHD / 801UHD / 802UHD Number of I/Os Front panel Front panel OFF Model HDBaseT input Keys Input Output MSD-701UHD MSD-702UHD MSD-801UHD MSD-802UHD 【See: 8.2.2 Turning off input signal】...

  • Page 12: Included Items

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 2 Included Items Ensure all items below are included in the package. If any items are missing or damaged, please contact IDK. One (1) main unit (MSD-802UHD) One (1) power cord (5.91 ft. (1.8 m))

  • Page 13: Product Outline

    Up to 39 ft. (12 m) : 4K@60 (when 18 Gbps high-speed cable is used) (IN1, IN2, OUT1 and OUT2 only) Maximum extension distance Up to 328 ft. (100 m) : Input/4K@60 (4:2:0), Output/4K@30 Up to 492 ft. (150 m) ：1080p (24 bit) in Long reach mode with IDK’s HDBaseT products supporting 328 ft. (100 m) [Fig. 3.1] MSD-802UHD diagram...

  • Page 14: Features

    ・Connection Reset ・Security lock For Long reach mode, up to 1080p (24 bit) resolutions are supported. Seamless switching with a black frame. Only for MSD-801UHD / 802UHD. Tip: For Long reach mode, use IDK’s HDBaseT products supporting 328 ft. (100 m).

  • Page 15: Panels

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 5 Panels Front panel ③ ④ ⑤ ⑦ ② ⑥ ① ⑧ [Fig. 5.1] Front panel drawing (MSD-802UHD) [Table 5.1] Front panel’s name and description Name Description ① POWER switch Powers on / off the MSD. ②...

  • Page 16: Rear Panel

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Rear panel ⑪ ⑫ ⑬ ⑪ ⑫ ⑬ ⑭ ⑧ ⑨ ⑩ ① ② ③ ④ ⑤ ⑥ ⑦ [Fig. 5.2] Rear panel drawing (MSD-802UHD) [Table 5.2] Rear panel’s part name and description Name Description ①...
  • Page 17 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 5.3] Rear panel’s part name and description (Cont’d) Name Description ⑩ LAN connector For external control by communication commands or web browsers ⑪ HDBaseT output Output connector for HDBaseT signal connector Connects to a receiver over a twisted pair cable.

  • Page 18: System Configuration Example

    Maximum extension distance Up to 328 ft. (100 m) : Input/4K@60 4:2:0, Output/4K@30 Up to 492 ft. (150 m) ：1080p (24 bit) in Long reach mode with IDK’s HDBaseT products supporting 328 ft. (100 m) [Fig. 6.1] Configuration example (MSD-802UHD)

  • Page 19: Precautions

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 7 Precautions Before connecting to external devices, follow the precautions below. Installation When installing the MSD, please observe the following precautions. ● Do not stack or place one MSD directly on top of another MSD. ●...

  • Page 20: Cabling

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Cabling When connecting the MSD to external devices, please observe the following precautions. ・Read manuals for the external devices. ・ Before you connecting cables to the MSD or an external device, dissipate static electricity by touching grounded metal such as racks before handling signal cables.

  • Page 21: Cables

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 7.2.1 Cables IDK has a large selection of flexible HDMI cables, DVI cables, high-quality long cables, and conversion cables. Use the correct cable depending on the system configuration. For analog audio and RS-232C, select or fabricate cables to match the connectors as needed.
  • Page 22 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Fig. 7.3] 29-pin DVI-I female connector [Table 7.1] Pin assignments Input signal name Pin # HDMI / DVI Analog RGB Analog YPbPr Composite video TMDS Data2- N.C. N.C. N.C. N.C. TMDS Data2+ N.C.

  • Page 23: Twisted Pair Cable For Extension

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 7.2.3 Twisted pair cable for extension To ensure the best performance of twisted pair cables, select a correct twisted pair cable and connect it correctly. ● Cat5e UTP/STP and Cat6 UTP/STP can be used, but we recommend CAT.5E HDC cable* for optimal performance.

  • Page 24: Connecting Audio Cables

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 7.2.4 Connecting audio cables Connect audio cables to the 5-pin terminal block. The MSD supports both balanced and unbalanced analog signals. AWG28 to AWG16 conductor gauge is recommended. The recommended wire strip length is 0.28 in. (7 mm). Up to 0.28"...

  • Page 25: Contact Closure

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 7.2.6 Contact closure The MSD has a total of three (3) independently controlled contact closure channels for external control. Each connector supports three (3) channels. The maximum peak load for each contact is 24 VDC @ 500 mA. Connect a cable to the 6-pin terminal block, and then insert into the appropriate connector on the MSD’s rear panel.

  • Page 26: Basic Operation

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 8 Basic operation Power up init period After powering on the MSD, there is some seconds initialization delay before the WEB browser is fully operational and before the first communication command can be received and executed. [Table 8.1] Required time Operation Required time...

  • Page 27: Turning Off Input Signal

    [Fig. 8.3] Input selection: OFF (MSD-802UHD) ■ MSD-702UHD / MSD-701UHD To stop outputting signals, press the “OFF” button of OUT1 or OUT2. Not outputting signals to OUT1 Outputting input signals of IN3 to OUT2 [Fig. 8.4] Input selection: OFF (MSD-702UHD)

  • Page 28: Menu Operation

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Menu operation You can use the VFD screen and front panel keys to view and control settings. Press the “MENU/SET” key to apply settings and to change the menu level. Press the “ESC” key to go back to the previous screen. Use the “▲”...

  • Page 29: Menu Operation

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Menu operation You can register control commands to power the sink device on/off. By pressing the appropriate key, control commands are sent to the sink device. 【See: 9.13.3 Command link】 [Table 8.3] Sink device power supply key DISPLAY IN 1 IN 2...

  • Page 30: Initialization

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Initialization All settings will be reset to factory default values by turning on the MSD while pressing the “ESC” key. Press and hold the “ESC” key until you hear a long beep sound. Table 8.4 below, shows the Factory default values.
  • Page 31 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.5] Factory default (Cont’d) Menu Factory default See: OUTPUT TIMING OUTPUT POSITION Each output channel P.50 Default H : 0 V : 0 OUTPUT SIZE Each output channel P.51 Default H : Horizontal input size V : Vertical input size OUTPUT MASKING Each output channel...
  • Page 32 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.6] Factory default (Cont’d) Menu Factory default See: INPUT SETTING INPUT VIDEO DETECT Each input channel, digital input only P.57 Default 10000 ms HDCP INPUT ENABLE Each input channel, digital input only P.58 Default HDCP 2.2...
  • Page 33 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.7] Factory default (Cont’d) Menu Factory default See: INPUT TIMING LOAD Each input channel, each input signal P.68 Default SAVE each input signal, each input signal P.68 Default TRACKING Each input channel, each input signal P.68 Default OUTPUT SETTING...
  • Page 34 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.8] Factory default (Cont’d) Menu Factory default See: AUDIO OUTPUT LEVEL Each output channel P.78 Default 0 dB OUTPUT MUTE Each output channel P.78 Default AUDIO INPUT SELECT Each input channel, digital input only P.78 Default DIGITAL...
  • Page 35 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.9] Factory default (Cont’d) Menu Factory default See: EDID EDID DATA Each input channel, digital input only P.83 Default INTERNAL EDID PC RESOLUTION Each input channel P.84 Default IN1 to IN2 : 2160p@60 (3840x2160) IN4 to IN7 : 1080p(1920x1080) : 2160p@30 (3840x2160) AV RESOLUTION...
  • Page 36 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.10] Factory default (Cont’d) Menu Factory default See: COM PORT PARAMETERS EACH RS-232C CHANNEL P.90 Default Baud rate : 9600 Data bit length Parity check : NONE Stop bit FUNCTION EACH RS-232C CHANNEL P.91 Default RECEIVER (Receiver mode)
  • Page 37 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.11] Factory default (Cont’d) Menu Factory default See: PRESET COMMAND COMMAND EDIT Each control command P.98 Default “[Table 9.21] Setting items of control command” RECV COMMAND EDIT Each reply command P.103 Default “[Table 9.26] Setting items of return command”...
  • Page 38 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.12] Factory default (Cont’d) Menu Factory default See: BITMAP BITMAP OUTPUT Each output channel P.116 Default BACKGROUND COLOR Each output channel, each bitmap P.116 Default R : 255 G : 255 B : 255 ASPECT Each output channel, each bitmap...
  • Page 39 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.13] Factory default (Cont’d) Menu Factory default See: OTHERS OP LOCK MODE CHANNEL P.124 CHANNEL MODE MENU COMMAND DISPLAY POW Default LOCK BUZZER P.125 Default POWER SAVE P.125 Default DISP POW BUTTON ON P.125 Default 0 ms...
  • Page 40 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 8.14] Setting condition Setting range Description Each output channel (Common to OUTA / Can be set for each output channel OUTB Setting is common to OUTA and OUTB (Each OUTA / OUTB) Can be set for each output channels Can be set for OUTA and OUTB separately (only OUTA)

  • Page 41: Web Menu Operation

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Web menu operation The MSD connected through a LAN can be controlled from a WEB browser, such as Microsoft Internet Explorer. JavaScript is used for the WEB browser screen. To do this, make sure to enable JavaScript of the WEB browser by referring to the HELP of each WEB browser.

  • Page 42: How To Use Web Menu

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 8.7.2 How to use WEB menu Menu Submenu IN/OUT [Fig. 8.6] WEB menu ① Select the target item from the menu. Settings will be displayed in the sub menu. ② If there is a setting item that can be set for each channel, channel tab will be displayed. ③...

  • Page 43: Menu

    │ ├─ANALOG INPUT TYPE MSD-801UHD │ ├─INPUT OFF CHECK MSD-802UHD │ ├─INPUT AD TYPE MSD-701UHD │ ├─LONG REACH MODE MSD-702UHD │/＊9.3 Channel switching mode＊/ │ └─INPUT TABLE FIXED │ ├─SWITCHING MODE │/＊9.4 Setting position, size, and masking＊/ │/＊9.7 Setting input timing＊/ ├─OUTPUT TIMING...
  • Page 44 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide │/＊9.9 Audio setting＊/ │/＊9.14 Preset memory＊/ ├─AUDIO ├─PRESET MEMORY │ ├─OUTPUT LEVEL │ ├─LOAD CROSS POINT │ ├─OUTPUT MUTE │ ├─SAVE CROSS POINT │ ├─AUDIO INPUT SELECT │ ├─EDIT CROSS POINT │ ├─INPUT OFFSET │...

  • Page 45: Input Signal Automatic Detection

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Input Signal Automatic Detection The MSD continuously monitors its input signals. If a particular signal has previously been connected to the MSD’s input, the output signal will be presented in the same format as it was during the most recent session. If an input signal does not match any signal previously presented to the MSD, only the input timing settings are automatically negotiated.

  • Page 46: Channel Switching Mode

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide The following attributes are saved for each input signal. [Table 9.1] Attributes saved for each input signal Setting Item Setting position, size, and Aspect ratio, Aspect ratio control, Overscan, masking Display position, Display size, Masking Quality setting Sharpness, Brightness, Contrast, HUE, Saturation, Black level...

  • Page 47: Setting Position, Size, And Masking

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Setting position, size, and masking Position, size, and masking attributes can be set for both the input ports and output ports of the MSD. Normally, it is preferable to set them for the input ports. If edges are cut off due to enlarged display area by the sink device side or if it is desired to modify the displayed area for all inputs at once, set the desired attributes for the output ports.
  • Page 48 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■”AUTO-A” and “AUTO-B”: “AUTO-A” (OUTA, HDMI output connector), “AUTO-B” (OUTB, HDBaseT output connector): Automatically selects the optimal output resolution format depending on the EDID of the connected sink device. The optimal format is then provided to the connected sink device via the MSD’s output connector. The actual output resolution is displayed in parentheses.

  • Page 49: Aspect Ratio For Sink Device

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.4.2 Aspect ratio for sink device Menu Top→OUTPUT TIMING→MONITOR ASPECT Setting for Each output channel (Common to OUTA / OUTB) Setting value ・RESOLUTION [Default] ・16:10 ・5:3 ・4:3 ・256:135 ・16:9 ・5:4 You can set the aspect ratio of the connected sink device. If you select “RESOLUTION,”...

  • Page 50: Aspect Ratio Control

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.4.4 Aspect ratio control Menu Top→OUTPUT TIMING→ASPECT PROCESS Setting for Each input channel, each input signal Setting value L-BOX/S-PANEL : letter box/side panel [Default] S-CUT/TB-CUT : Side cut/top bottom cut Below is a visual description of restoring aspect ratio: Output signal Input signal L-BOX/S-PANEL...

  • Page 51: Display Size

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.4.7 Display size Menu Top→OUTPUT TIMING→INPUT SIZE (input side) / OUTPUT SIZE (output side) Setting for Input side : Each input channel, each input signal Output side : Each output channel (Common to OUTA / OUTB) Setting value Input side: Horizontal size (Horizontal output resolution ÷...

  • Page 52: Masking

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.4.8 Masking Menu Top→OUTPUT TIMING→INPUT MASKING (Input side) / OUTPUT MASKING (Output side) Setting for Input side : Each input channel, each input signal Output side : Each output channel (Common to OUTA / OUTB) Setting value Input side: Left side masking...

  • Page 53: Background Color

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.4.10 Background color Menu Top→OUTPUT TIMING→BACKGROUND COLOR Setting for Each output channel (Common to OUTA / OUTB) Setting value R / G / B: 0 to 255 [Default] R / G / B: 0 (black) You can set the background color of output video.

  • Page 54: Quality Settings

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Quality settings Setting items for input channels are for correcting color bias. Image quality to be output can be set for each input side (input channels) and output side (output channels) as follows.

  • Page 55: Hue

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.5.4 HUE Menu Top→IMAGE EFFECT→INPUT HUE Setting for Each input channel, each input signal Setting value 0° to 359° [Default] 0° You can set the color HUE for each input signal. 9.5.5 Saturation Menu Top→IMAGE EFFECT→INPUT SATURATION Setting for...

  • Page 56: Default Color

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.5.8 Default color Menu Top→IMAGE EFFECT→IN DEFAULT COLOR (Input side) / OUT DEFAULT COLOR (Output side) Setting for Input side : Each input channel, each input signal Output side : Each output channel (Common to OUTA / OUTB) You can initialize settings of the following items.

  • Page 57: Input Settings

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Input settings 9.6.1 No-signal input monitoring Menu Top→INPUT SETTING→INPUT VIDEO DETECT Setting for Each input channel (only digital input signal) Setting value OFF, 2000ms to 15000ms (100 ms steps) [Default] 10000ms If you change the EDID settings of the MSD or power the MSD off/on, the source device may not output a video signal.

  • Page 58: Input Hdcp Setting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.6.2 Input HDCP setting Menu Top→INPUT SETTING→HDCP INPUT ENABLE Setting for Each input channel (only digital input signal) Setting value ・HDCP 2.2 : Supports HDCP 2.2 and HDCP 1.4 [Default]: [IN1, IN2, IN8] ・HDCP 1.4 : Supports HDCP 1.4 [Default]: [IN3 to IN7] ・DISABLE : Not support HDCP Some source devices negotiates with the connected device to determine if it supports HDCP encryption.

  • Page 59: Analog Input Signal Parameters

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.6.3 Analog input signal parameters Menu Top→INPUT SETTING→ANALOG INPUT TYPE Setting for Each input channel, each input signal (only analog input) Setting value ・AUTO : Automatic [Default] ・VIDEO AUTO : Video automatic ・RGB ・VIDEO : Analog RGB...

  • Page 60: Automatic Detection Of Video Input Interruption

    You can enable / disable long reach mode for HDBaseT input. In long reach mode, up to 1080p (24 bit)/ dot clock 148 MHz is supported when using with IDK’s HDbaseT product. Set the MSD’s EDID to 1080p or less or set the connected device’s output to a supported signal format.

  • Page 61: Fixing Settings For Each Input Signal

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.6.7 Fixing settings for each input signal Menu Top→INPUT SETTING→INPUT TABLE FIXED Setting for Each input channel Setting value Setting mode: ・SELECTED : Sets for each item [Default] ・ALL FIXED : Does not load settings saved for each input signal but fixes the current settings Individual setting (if “SELECTED”...

  • Page 62: Setting Input Timing

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Setting input timing You can set the timing parameters for analog signal inputs. The MSD loads the optimal table from its embedded library of tables and adjusts the input timing automatically, you typically will not need to change settings in this menu. However, if signals which are not registered in the MSD tables are input or if part of the video image is cut off while relying on the standard table registered in the MSD, you may optimize the input timing parameters manually.

  • Page 63: Automatic Measurement

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.7.1 Automatic measurement Menu Top→INPUT TIMING→AUTO SETUP Setting for Each input channel, each input signal (only analog input signal) Setting value ・NORMAL MODE [Default] ・4:3 ・5:3 ・16:10 ・NEXT ASPECT ・5:4 ・16:9 Analog RGB/analog YPbPr input video is measured to set ”9.7.2 The total number of horizontal dots”, ”9.7.3 Start position”, ”9.7.4 Active area”...
  • Page 64 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide If the total number of horizontal dots is not correct, the aspect ratio is not matched even though automatic measurement is set to “NORMAL MODE”. In this case, select “NEXT ASPECT” (Auto measurement taking into account aspect ratio) for the measurement function.

  • Page 65: The Total Number Of Horizontal Dots

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.7.2 The total number of horizontal dots Menu Top→INPUT TIMING→H TOTAL DOTS Setting for Each input channel, each input signal (only analog input signal) Setting value 400DOT to 4125DOT [Default] varies depending on the input signal You can set the total number of horizontal dots of analog RGB/analog YPbPr input video.

  • Page 66: Active Area

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.7.4 Active area Menu Top→INPUT TIMING→H DISPLAY (Horizontal) / V DISPLAY (Vertical) Setting for Each input channel, each input signal Setting value [Table 9.6] Settings of active area [Table 9.6] Settings of active area Function Setting value Horizontal active area...

  • Page 67: Automatic Measurement Of Start Position

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.7.5 Automatic measurement of start position Menu Top→INPUT TIMING→AUTO START POS Setting for Each input channel, each input signal (only analog input signal) Setting value ALL OFF : not measuring all inputs from the input automatically : not measuring the current input signal automatically : measuring the current input signal automatically [Default] The MSD monitors continuously the upper left of analog input video signal and it automatically matches the...

  • Page 68: Loading Device Data

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.7.7 Loading device data Menu Top→INPUT TIMING→LOAD Setting for Each input channel, each input signal Device data whose input timing is registered can be loaded according to the input signal. The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the MENU/SET key to update the setting.

  • Page 69: Output Settings

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Output settings 9.8.1 Output mode Menu Top→OUTPUT SETTING→OUTPUT MODE Setting for Each output channel (Each OUTA / OUTB) Setting value ・HDMI YCbCr 4:4:4 MODE [Default] ・HDMI RGB MODE ・HDMI YCbCr 4:2:2 MODE ・DVI MODE ・HDMI YCbCr 4:2:0 MODE *only OUTA You can select an output signal mode and color space of the output video.

  • Page 70: Output Video With No Input Video

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.8.3 Output video with no input video Menu Top→OUTPUT SETTING→VIDEO OUTPUT Setting for Each output channel (Common to OUTA / OUTB) Setting value ・BLUE [Default] ・BACKGROUND COLOR ・BLACK You can set the color of the video to be output when no video signal is input from the selected input. The setting will be valid when “9.8.2 Synchronous signal output with no input video”...

  • Page 71: Video Output Connector

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.8.7 Video output connector Menu Top→OUTPUT SETTING→OUTPUT CONNECTOR Setting for Each output channel (OUTA / OUTB) Setting value ON [Default], OFF The MSD distributes the same video to the HDMI output connector and HDBaseT output connector. You can set the each connector to output the video or not.

  • Page 72: The Number Of Hdcp Retries

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.8.9 The number of HDCP retries Menu Top→OUTPUT SETTING→HDCP ERROR RETRY Setting for Each output channel (OUTA / OUTB) Setting value ETERNITY: retry until succeeded [Default] 0 to 100: 0 to 100times You can set the number of HDCP retries.

  • Page 73: Cec Connection

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.8.11 CEC connection Menu Top→OUTPUT SETTING→CEC CONNECTION Setting for Each output channel (OUTA / OUTB) Setting value ・NOT CONNECTED [Default] ・SELECTED CHANNEL ・IN1 to IN8 You can set the CEC connection for when CEC-supported device is connected to HDMI input connector, HDBaseT input connector, HDMI output connector, or HDBaseT output connector.

  • Page 74: Priority Of Input Channel Automatic Switching

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.8.13 Priority of input channel automatic switching Menu Top→OUTPUT SETTING→AUTO SWITCHING ON / AUTO SWITCHING OFF Setting for Each output channel (Common to OUTA / OUTB) Setting value [Table 9.8] Setting of priority of input channel automatic switching [Table 9.8] Setting of priority of input channel automatic switching Item Set value...
  • Page 75 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ AUTO SWITCHING OFF AUTO SWITCHING OFF menu switches input signal when the input signal changes from “ON” to “OFF”. The MSD switches input signal automatically based on following conditions; ・Switches to the input channel having input signal and highest priority. ・If some channels have the same priority, the MSD switches to the lower input channel having input signal.

  • Page 76: Masking Time After Automatic Switching Of Input Channel

    Up to 492 ft. (150 m) . You can enable / disable HDBaseT output long reach mode. In long reach mode, up to 1080p (24 bit)/ dot clock 148 MHz is supported when using with IDK’s HDbaseT product. Select a supported output format.

  • Page 77: Audio Setting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Audio setting HDMI digital audio supports the following formats. Set audio depending on device connected to the HDMI output connector. Only “2 channel linear PCM” can be input by Factory default. If you want to use “Multi channel linear PCM” or bit stream signal (compressed audio), set “Audio format”...

  • Page 78: Output Level

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.1 Output level Menu Top→AUDIO→OUTPUT LEVEL Setting for Each output channel (Common to OUTA / OUTB) Setting value -60dB to 10dB [Default] 0dB You can set the audio output level. If you change the output level while audio output mute is set to “ON”, mute is canceled. If you set top display of front VFD screen to audio volume adjustment from “9.17.6 Top page”, you can change and set audio output level from top display.

  • Page 79: Lip Sync

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.5 Lip sync Menu Top→AUDIO→OUTPUT LIP SYNC (Output side) / INPUT LIP SYNC (Input side) Setting for Output side : Each output channel (Common to OUTA / OUTB) Input side : Each input channel, each input signal Setting value 0FRAME to 8FRAME [Default] 0FRAME You can adjust the gap between video (motion) and audio (sound).

  • Page 80: Audio Output Connector

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.7 Audio output connector Menu Top→AUDIO→AUDIO OUTPUT Setting for Each output channel (OUTA / OUTB) Setting value [Table 9.11] Settings of audio output control You can control the audio outputs of the audio output connector, HDMI output connector, and HDBaseT output connector.

  • Page 81: Multi Channel Audio Output Priority

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.10 Multi channel audio output priority Menu Top→AUDIO→OUT AUDIO PRIORITY Setting for Each output channel (Common to OUTA / OUTB) Setting value DOWN MIX, MULTI [Default] If outputting multi channel linear PCM to a sink device, the MSD checks whether the sink device supports multi channel linear PCM.

  • Page 82: Test Tone

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.9.11 Test tone Menu Top→AUDIO→TEST TONE Setting for Each output channel (Common to OUTA / OUTB) Setting value Test tone: OFF [Default], 1kHz, 400Hz Speaker: ・ALL [Default] ・LOW FREQUENCY EFFECT ・FRONT L/R ・FRONT CENTER ・REAR L/R ・REAR LEFT...

  • Page 83: Edid (Extended Display Identification Data)

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.10 EDID (Extended Display Identification Data) You can set or customize EDID to be sent to the source device. Change the setting as needed. ■ Setting EDID Step 1 If you use copied EDID, copy the target EDID from the sink device. Step 2 Set the EDID that will be sent to the source device.

  • Page 84: Resolution For Pcs

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.10.2 Resolution for PCs Menu Top→EDID→PC RESOLUTION Setting for Each input channel Setting value ・SVGA (800x600) ・WXGA (1366x768) ・WUXGA (1920x1200) ・XGA (1024x768) ・SXGA+ (1400x1050) ・QWXGA (2048x1152) ・720p (1280x720) ・WXGA+ (1440x900) ・WQHD (2560x1440) ・WXGA (1280x768) ・WXGA++ (1600x900) ・WQXGA (2560x1600)
  • Page 85 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 9.13] Supported resolution Supported resolution Input resolution settings 800x600 1024x768 1280x720[D4] 1280x768 1280x800 1280x960 1280x1024 1360x768 1366x768 1400x1050 1440x900 1600x900 1600x1200 1680x1050 1920x1080i[D3] 1920x1080p[D5] 1920x1200 2048x1152 2560x1440 2560x1600 2160p (30p) 2160p (60p) Y: Supported , N: Not supported...

  • Page 86: Input Resolution For Av Devices

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.10.3 Input resolution for AV devices Menu Top→EDID→AV RESOLUTION Setting for Each input channel (only digital input) Setting value ・AUTO [Default] ・1080i ・2160p@60 4:4:4 ・UNUSED ・1080p ・4096x2160@30 ・480p ・2160p@30 ・4096x2160@60 4:2:0 ・720p ・2160p@60 4:2:0 ・4096x2160@60 4:4:4 N1, IN2, IN8...

  • Page 87: Deep Color

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.10.4 Deep Color Menu Top→EDID→DEEP COLOR INPUT Setting for Each input channel (only digital input) Setting value 24-BIT COLOR [Default], 30-BIT COLOR You can set the color depth to be output from the source device. This menu is valid only if you select “INTERNAL EDID”...

  • Page 88: Speaker Configuration

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.10.6 Speaker configuration Menu Top→EDID→SPEAKER Setting for Each input channel (only digital input) Setting value Setting mode : AUTO [Default], MANUAL Each speaker : ON, OFF The number of speakers: 1 to 8 [Table 9.16] Default speaker configuration FLC/ RLC/...

  • Page 89: Copying Edid

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide You can set the speaker configuration of multi channel audio. This menu is valid only if you select “INTERNAL EDID” for “9.10.1 EDID“, you select a resolution other than “UNUSED” for “9.10.3 Input resolution for AV devices”. If you select “AUTO”...

  • Page 90: Rs-232C

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.11 RS-232C The RS-232C connector of the MSD can output communication command control from PCs and can output control command to external devices from the MSD. The operation mode will be switched according to “9.11.2 RS-232C operation mode”.

  • Page 91: Rs-232C Operation Mode

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.11.2 RS-232C operation mode Menu Top→COM PORT→FUNCTION Setting for RS-232C connector, OUT1B connector, OUT2B connector, IN8 connector Setting value RECEIVER,TRANSMITTER [Default] RS-232C connector, IN8 connector: RECEIVER OUT1B connector, OUT2B connector: TRAMSMITTER You can set the operation mode to “RECEIVER” mode in which the MSD is controlled externally or “TRANSMITTER”...

  • Page 92: Lan

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.12 LAN ■ LAN communication The internal switching hub enables connections between the MSD’s LAN connector and LAN connectors of twisted pair cable transmitter and receiver that are connected to HDBaseT I/O connectors. Bidirectional communication is also available.
  • Page 93 Twisted pair cable Twisted pair cable transmitter MSD-802UHD (Rear) MSD-802UHD (Front) Switching hub [Fig. 9.23] Loop problem with other manufacture’s device Switching hub MSD-802UHD Twisted pair cable Loop problem Twisted pair cable MSD-402 Switching hub [Fig. 9.24] Loop problem with IDK’s device...

  • Page 94: Ip Address/Subnet Mask/Gateway Address

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.12.1 IP address/Subnet mask/Gateway address Menu IP address: Top→LAN→IP ADDRESS Subnet mask: Top→LAN→SUBNET MASK Gateway address: Top→LAN→GATEWAY ADDRESS Setting value [Default] IP address: 192.168.1.199 Subnet mask: 255.255.255.0 Gateway address: 192.168.1.200 You can set IP address, subnet mask, and gateway address. The setting of this menu is not updated until the MENU/SET key is pressed.

  • Page 95: Tcp Port Number

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.12.3 TCP port number Menu Top→LAN→PORT NUMBER Setting for Each connection Setting value [Table 9.20] Settings of TCP port number [Table 9.20] Settings of TCP port number Setting value Communication command control 23, 1100, 6000 to 6999 WEB browser control 80, 5000 to 5999...

  • Page 96: Setting Control Command

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13 Setting control command You can control external devices (for example, turning ON/OFF projectors) via RS-232C, LAN, contact closure, or CEC. You can register up to 32 commands in the MSD. Registered control commands will be associated with control command execution keys (COMMAND A to COMMAND I) or execution conditions such as switching video or audio.
  • Page 97 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Control command via RS-232C / LAN communication Control commands can be sent from MSD’s RS-232C connector, LAN connector, or HDBaseT output connector. Before executing control command, set the operation mode of the connector to “TRANSMITTER”. 【See: 9.11.2 RS-232C operation mode】...

  • Page 98: Registering/Editing Control Command

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13.1 Registering/editing control command Menu Top→PRESET COMMAND→COMMAND EDIT Setting for Each command Setting value [Table 9.21] Setting items of control command You can create and edit up to 32 control commands. The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the MENU/SET key to update the setting.
  • Page 99 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 9.22] Setting items of control command (Cont’d) Setting Item Description Range RECV DISPLAY Set whether received data is displayed or OFF [Default] not. ASCII DELIMITER Set the delimiter to be sent at the end of the NONE [Default] received data.
  • Page 100 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide If you set “RECV DISPLAY” to “OFF”, you cannot set this item. If you set “RECV DISPLAY” to “ASCII” or “HEX”, you cannot set this item. If you set only “LOOP BACK” of communication ports to “ON”, you do not need to set this item. If you set all “RCV CHECK”...
  • Page 101 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 9.23] PJLink command (class1) list Command Description R (SP) (CR) Power off (Standby) R (SP) (CR) Power on (Lamp on) R (SP) (CR) Get power status T (SP) (CR) Switch input to RGB T (SP) (CR) Switch input to VIDEO T (SP)
  • Page 102 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide [Table 9.25] Individual reply command of status acquisition commands Command Description Reply command to power status commands (CR) Stand by (CR) Power ON (CR) Cooling (CR) Warming up Reply command to input status commands (CR) RGB selected (CR)

  • Page 103: Registering / Editing Reply Command

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13.2 Registering / Editing reply command Menu Top→PRESET COMMAND→RECV COMMAND EDIT Setting for Each command Setting value [Table 9.26] Setting items of return command You can create and edit up to 32 reply commands. The setting of this menu is not updated until the MENU/SET key is pressed.
  • Page 104 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Setting loop back function If the MSD sends a communication command back to the MSD itself using the loop back function, the MSD replies “OK” if processed normally while it replies “NG” if parameter or command is incorrect. (This differs from reply commands to communication commands received externally;...
  • Page 105 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Mask data Each bit of the received data is ANDed to each bit of mask data, and the result will be compared with the reply command data. Since “FF” is set by factory default, you do not need to change the mask data normally.

  • Page 106: Command Link

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13.3 Command link Menu Top→PRESET COMMAND→COMMAND LINK Setting for [Table 9.28] Control command execution condition (Example: MSD-802UHD) Setting value OFF [Default], COMMAND 1 to COMMAND 32 The MSD has 59 command execution conditions as shown below. If these execution conditions are met, control commands which are associated beforehand will be executed.

  • Page 107: Command Execution

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13.4 Command execution Menu Top→PRESET COMMAND→COMMAND EXECUTION Setting value CMD 1 to CMD 32,COMMAND A to COMMAND I You can execute the registered control commands. Only registered control command numbers are displayed as settable values. To execute the control command, press the “MENU/SET”...

  • Page 108: Command Execution Key: Illuminating Condition

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.13.7 Command execution key: Illuminating condition Menu Top→PRESET COMMAND→COMMAND TALLY Setting for Each control command execution key Setting value REGISTERED : Lights if a control command is registered [Default] *1 *2 EXECUTION : Lights while a control command is executed If you set “LINK”...

  • Page 109: Preset Memory

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.14 Preset memory 9.14.1 Recalling cross point Menu Top→PRESET MEMORY→LOAD CROSS POINT Setting value No.1 to No.9 You can recall the I/O channel settings of video and audio saved in the cross point memory. The setting of this menu is not updated until the MENU/SET key is pressed.

  • Page 110: Editing Cross Point

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.14.3 Editing cross point Menu Top→PRESET MEMORY→EDIT CROSS POINT Setting for Each cross point memory Setting value [Table 9.30] Editing cross point item [Table 9.30] Editing cross point item Setting item Setting value Default Output channel (OUT) 1 to 2...

  • Page 111: Saving All Settings

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.14.5 Saving all settings Menu Top→PRESET MEMORY→SAVE ALL SETTING Setting value No.1 to No.8 You can save up to 8 preset memories and name these memories up to 10 characters from ASCII 20 to 7D. You can skip the naming procedure.

  • Page 112: Copying Output Setting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.14.6 Copying output setting Menu Top→PRESET MEMORY→COPY OUTPUT MEMORY Setting value OUT1 → OUT2,OUT2 → OUT1 You can copy the setting data of the selected output channel to other output channels. The setting of this menu is not updated until the MENU/SET key is pressed.

  • Page 113: Startup Setting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.14.7 Startup setting Menu Top→PRESET MEMORY→STARTUP Setting value [Table 9.33] Startup setting You can set the memory loading at startup. [Table 9.33] Startup setting Item Setting value Startup operation Last channel LAST CHANNEL [Default] Starts with the setting last time the MSD powered off.

  • Page 114: Bitmap Setting

    9.15.1 Sending bitmap file You can set the bitmap image to be displayed on the sink device. Up to four bitmaps can be registered. IDK’s logo is displayed by Factory default. Bitmaps can be enlarged but cannot be reduced. The larger the resolution is, the longer the output time will be, and it may take a maximum of approximately six seconds to output a bitmap.
  • Page 115 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Transferring bitmap file Use the WEB menu to transfer bitmap files. Step (1) If the memory area is divided, select the registered area of the bitmap file. Step (2) Select the target bitmap file using the “FILE” button. Step (3) Click the “SEND”...

  • Page 116: Outputting Bitmap Image

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.15.2 Outputting bitmap image Menu Top→BITMAP→BITMAP OUTPUT Setting for Each output channel (Common to OUTA and OUTB) Setting value OFF [Default], ON (BITMAP1 ON to BITMAP4 ON) You can enable/disable the bitmap image output. If several bitmaps are registered, select the bitmap number you want to output.

  • Page 117: Display Position

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.15.5 Display position Menu Top→BITMAP→POSITION Setting for Each output channel, each bitmap Setting value [Fig. 9.31] Position You can set the display position of the bitmap. ● TOP-LEFT ● TOP-RIGHT ● CENTER [Default] ●...

  • Page 118: Dividing Memory Area

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.15.8 Dividing memory area Menu Top→BITMAP→DIVIDE MEMORY Setting value [Table 9.36] Dividing memory area You can register up to four bitmaps within the available memory area by dividing the memory. You can select one of three dividing modes or specify the size you want to divide manually.
  • Page 119 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Displaying method “BLOCK” If you select “BLOCK” for “DISPLAY”, the current start and end block positions are displayed on the left of the VFD screen. If a bitmap is registered, the final block position is displayed in parentheses. The start and end block positions after divide are displayed on the right.

  • Page 120: Input Image Capture

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.15.9 Input image capture Menu Top→BITMAP→VIDEO CAPTURE Setting value [Table 9.37] Input image capture setting [Table 9.37] Input image capture setting Setting item Setting value Default Output channel OUT1,OUT2 OUT1 Register number No.1 to No.4 No.1 * Settable if memory area is divided...
  • Page 121 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ From browser You can capture and save an input video through a WEB browser as well. Step1) If the memory area is divided, select the registered area of the captured image. Step2) Set “FREEZE”...

  • Page 122: Startup Setting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.16 Startup setting 9.16.1 DISPLAY POWER keys Menu TOP→POWER ON SETTING→DISPLAY POWER Setting for Each output channel (Common to OUTA and OUTB) Setting value OFF [Default], ON You can set the DISPLAY POWER key state for when MSD is powered on. “OFF”...

  • Page 123: Key Function Lock

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.16.2 Key function lock Menu Top→POWER ON SETTING→OPERATION LOCK Setting value AUTO [Default], UNLOCK, LOCK You can set the key function lock for when the MSD is powered on. “AUTO” : The same state as it was before powering off the MSD. “UNLOCK”...

  • Page 124: Other Settings

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17 Other settings 9.17.1 Grouping key function lock Menu Top→OTHERS→OP LOCK MODE Setting for CHANNEL, CHANNEL MODE, MENU, COMMAND, DISPLAY POW Setting value LOCK [Default], UNLOCK You can group front keys for key function lock. 【See: 8.5 Locking and unlocking key】...

  • Page 125: Buzzer

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.2 Buzzer Menu Top→OTHERS→BUZZER Setting value ON [Default], OFF You can enable / disable the buzzer function (sounding every time you press a front panel key). 9.17.3 Power saving Menu Top→OTHERS→POWER SAVE Setting value ON [Default], OFF If you select “ON”...

  • Page 126: Top Page

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.6 Top page Menu TOP→OTHERS→TOP DISPLAY Setting value [Fig. 9.36] Top page of VFD screen “NORMAL” [Default] “AUDIO VOLUME” [OUT1 AUDIO] MUTE MSD-802UHD Youn can mute/unmute by [ V&A ] pressing the “ESC” key. “MONITOR STATUS”...

  • Page 127: Input Signal Status

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.7 Input signal status Menu Top→OTHERS→INPUT STATUS Values to be displayed [Table 9.42] Input signal status You can view the input signal status that is input from HDMI and DVI input connectors. [Table 9.42] Input signal status All input channels Video status of each input channel...
  • Page 128 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Input video signal format [Table 9.44] Input video signal format Signal type Items to be displayed Example Format type, vertical synchronous 1080p 59.94Hz SDTV / HDTV signal frequency Horizontal / Vertical resolution, vertical 800 x 600 60.00Hz RGB signal synchronous frequency...

  • Page 129: Sink Device Status

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.8 Sink device status Menu Top→OTHERS→MONITOR STATUS Values to be displayed [Table 9.46] Sink device status You can view the status of sink device connected to video output connectors. [Table 9.46] Sink device status All video output connector Each video output connector Display...
  • Page 130 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ Error code From the left, statuses of video output, digital audio output, and analog audio output are displayed. (Example: AAA) [Table 9.48] Error code Code Video output Audio output If any number or character is not displayed, video or audio is output correctly. －...

  • Page 131: Viewing Sink Device Edid

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.9 Viewing sink device EDID Menu Top→OTHERS→EDID STATUS Values to be displayed [Table 9.49] Sink device EDID You can display EDID information of the sink device that is connected to the video output connector. ・HDMI supported sink device : No.1 to No.6 ・Non-HDMI-supported sink device : No.1 and No.2...

  • Page 132: Viewing Version Information

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 9.17.10 Viewing version information Menu Top→OTHERS→VERSION Values to be displayed Model name and firmware version You can view the model name and firmware version.

  • Page 133: Product Specification

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 10 Product specification ■ MSD-701UHD Item Description 2 inputs HDMI Deep Color (*1) / DVI 1.0 TMDS single link, HDCP 1.4 / 2.2 TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps EDID emulation Connector: Female HDMI Type A (19-pin) HDMI / DVI...
  • Page 134 The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m) or longer.
  • Page 135 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ MSD-702UHD Item Description 2 inputs HDMI Deep Color (*1) / DVI 1.0 TMDS single link, HDCP 1.4 / 2.2 TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps...
  • Page 136 The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m) or longer.
  • Page 137 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ MSD-801UHD Item Description 2 inputs HDMI Deep Color (*1) / DVI 1.0 TMDS single link, HDCP 1.4 / 2.2 TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps EDID emulation Connector: Female HDMI Type A (19-pin) HDMI / DVI...
  • Page 138 The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m) or longer.
  • Page 139 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide ■ MSD-802UHD Item Description 2 inputs HDMI Deep Color (*1) / DVI 1.0 TMDS single link, HDCP 1.4 / 2.2 TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps EDID emulation Connector: Female HDMI Type A (19-pin) HDMI / DVI...
  • Page 140 The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m) or longer.

  • Page 141: Troubleshooting

    MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide 11 Troubleshooting This chapter recommends what to do if you have problems operating the MSD. In case the MSD does not work correctly, please check the following items first. ･Are the MSD and all devices plugged in and powered on normally? ･Are cables connected correctly? ･Are there no loose connections? ･Are correct cables supported by devices being used?
  • Page 142 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page Digital input video is [1] The set time for monitoring no-signal input may be too short. not output. Analog input video is [3] Change the input signal type. not output.
  • Page 143 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page Video from analog Change the input signal type. input is displayed in black-and-white or green. VHS reproduction or Automatic detection of input signal failed. Set the input signal type fast-forward is manually to “VIDEO AUTO”, “VIDEO”, or “Y/C”.
  • Page 144 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide only part of the PC and PC resolutions. 83, 84 video is displayed, If the copy of the built-in LCD screen is output in the laptop, and the rest is the output to an output monitor is limited to the resolution of displayed by scrolling the LCD screen.
  • Page 145 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Part of the bitmap is If the bitmap resolution does not match the output resolution, the cut off, or bitmap is bitmap may be partially cut off or may not be displayed on the full not displayed on the screen, depending on settings of the aspect ratio and display full screen.
  • Page 146 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page ●Audio output Audio is not output. If audio is not output, first check the error code in “9.17.8 Sink device status”. (The MSD has multiple output connectors. Find the error code of the output connector that does not output audio.) ・Error code 1: Set “9.9.2 Output mute”...
  • Page 147 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page － Audio is not output [14] Is video being output correctly? If not, check [1], [2], [5] and [6]. from digital input. [15] Is DVI signal output from the source device? You can check the input signal type in “9.17.7 Input signal status”.
  • Page 148 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page ●Key operation Keys do not operate. Ensure that keys are not locked. Since no control command is registered by Factory default, 98, 106 “DISPLAY POWER” keys do not work. Register and associate control commands in order to enable these keys.
  • Page 149 MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide Problem Cause/Check item/Solution Page “RETRY OVER Is the registered reply command correct? ERROR” is displayed Ensure that the setting of “TIME OUT” for checking control and control commands is not too short. command is not sent completely.
  • Page 150 Issued on: 11 May 2018 Headquarters IDK Corporation 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-200-0764 FAX: +81-46-200-0765 Email: idk_eng@idk.co.jp URL: http://www.idkav.com IDK America Inc. 72 Grays Bridge Road Suite 1-C, Brookfield, CT 06804 TEL: +1-203-204-2445 Email: sales@idkav.com URL: http://www.idkav.com...

This manual is also suitable for:

Msd-701uhdMsd-802uhdMsd-801uhd

Table of Contents