Invalid Time [Invalid Time] - IDK MSD-5401 User Manual

Presentation switcher
Table of Contents

Advertisement

2. To execute control commands using command:
@EXC: Execute control commands

8.12.5 Invalid time [INVALID TIME]

During control command execution, other operations from a port (any of front panel, parallel input, RS-232C
CH1, RS-232C CH2, LAN communication command, and LAN browser) that executes control commands will
be invalid. Since the execution time of some control commands is short, you can set the waiting time from
starting control command execution to receiving the next command. The longer time either of control
command execution time or the time set in this menu will be applied as the invalid operation time. Use this
menu to prevent repeated execution caused by pressing the control command execution key twice. Only
operations from ports that execute control commands will be invalid; operations from other ports can be
performed. For example, if you execute a control command from the front panel, you cannot perform all
operations from the front panel until the control command execution time or time set in this menu passes, but
you can perform operations from the parallel input. However, even during invalid operation time, for
controlling power of display devices and switching inputs, you can control display devices' power and can
then switch input only for different outputs, in order to operate several outputs successively.
・Invalid time: 0 ms. to 999999 ms. [Default]: 0 ms.
1. To set the invalid time using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
INVALID TIME
↓ SET key
[INVALID TIME]
0s000ms
↓◄►keys
[INVALID TIME]
0s000ms
↓ ESC key: Returns to the previous screen.
2. To set the invalid time using commands:
@SIT: Set ineffective time during control command
@GIT: Get ineffective time during control command
Top
▲▼keys: Select "PRESET COMMAND".
▲▼keys: Select "INVALID TIME".
▲▼keys: Set the invalid time in seconds (0 to 999).
▲▼keys: Set the invalid time in milliseconds (0 to 999).
180
MSD-54 SERIES User's Guide

Advertisement

Table of Contents
loading

Table of Contents