Test Tone [Test Tone] - IDK MSD-5401 User Manual

8.8.10 Test tones [TEST TONE]
Since test tone can be output only to specific speakers, you can check the position of the speakers.
･Test tones:
･OFF [Default]
･1 kHz
･400 Hz
･Speakers' position:
･ALL [Default]
･FRONT L/R
･REAR L/R
･REAR L/R CENTER･FRONT CENTER
Note:
For "LOW FREQUENCY EFFECT", only test tone of 30 Hz is output.
1. To set the test tone using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
AUDIO
↓ SET key
[AUDIO]
TEST TONE
↓ SET key
[OUT1 TEST TONE]
OFF
↓ ◄►keys
[OUT1 SPEAKER]
ALL
↓ ESC key: Returns to the previous screen.
･FRONT LEFT
･FRONT RIGHT
･LOW FREQUENCY EFFECT ･REAR LEFT CENTER
FLH
FLW FL FLC
FRONT
REAR RL RLC
FL Front Left
FC Front Center
FR Front Right
FLC Front Left Center
FRC Front Right Center
RL Rear Left
RC Rear Center
RR Rear Right
RLC Rear Left Center
[Figure 8.44] Speaker configuration
Top
▲▼keys: Select "AUDIO".
▲▼keys: Select "TEST TONE".
▲▼keys: Select the desired test tone of OUT1.
▲▼keys: Select the desired speaker of OUT1.
･REAR LEFT
･REAR RIGHT
･REAR RIGHT CENTER
FCH FRH
FC FRC FR
TC
RC RRC RR
RRC Rear Right Center
LFE Low Frequency Effect
FLW Front Left Wide
FRW Front Right Wide
FLH Front Left High
FCH Front Center High
FRH Front Right High
TC Top Center
132
MSD-54 SERIES User's Guide
For each output
FRW
LFE
*