Edid Copy [Monitor Edid Copy] - IDK MSD-5401 User Manual

8.9.7 EDID Copy [MONITOR EDID COPY]

You can load the EDID of display devices and save it in the MSD.
To use the copied EDID, select "COPY DATA" for "8.9.1 EDID setting". After that, the copied data can be
used as the same as that of the built-in data.
The copied EDID can only be used for digital input (IN1 to IN5), and not for analog inputs (IN6 to IN9).
1. To copy the EDID using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
EDID
↓ SET key
[EDID]
MONITOR EDID COPY
↓ SET key
↑ ESC key: Cancels the setting and returns to the previous screen.
[MONITOR EDID COPY]
OUT1 NO.1 COPY DATA1
↓◄►keys
[MONITOR EDID COPY]
OUT1 NO.1
↓◄►keys
[MONITOR EDID COPY]
OUT1 NO.1 COPY DATA1
↓ SET key: Displays the confirmation screen↑ ESC key
[MONITOR EDID COPY]
SAVE? = NO
↓ To save the settings: Select "YES" and press the "SET" key.
To return to the menu without saving: Select "NO" and press the "SET" key.
[MONITOR EDID COPY]
EDID COPY COMPLETE
↓
[EDID]
MONITOR EDID COPY
If no display device is connected to the selected output, the message is displayed,
and you cannot press the "SET" key.
2. To copy the EDID using command:
@RME: Copy EDID
Top
▲▼keys: Select "EDID".
▲▼keys: Select "MONITOR EDID COPY".
▲▼keys: Select the desired output connector (OUT1 to OUT4).
▲▼keys: Select the desired EDID number (1 to 8).
COPY DATA1
▲▼keys: Set the EDID name (20 to 7D of "9 ASCII codes").
Up to 10 characters can be registered. The cursor moves to the next
character using ◄►keys.
▲▼keys: Select "YES" or "NO".
The message is displayed for one second and then previous screen is
displayed automatically.
144
MSD-54 SERIES User's Guide
[MONITOR EDID COPY]
OUT1 UNCONNECTED
*