The Total Number Of Horizontal Dots [H Total Dots] - IDK MSD-5401 User Manual

8.6.1 The total number of horizontal dots [H TOTAL DOTS]

You can set the total number of horizontal dots of analog RGB/analog YPbPr input video videos.
･The total number of horizontal dots: 400 to 4125 (Within sampling clock 13M Hz to 162M Hz)
[Default]: Depends on input signals
1. To set the total number of horizontal dots using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
H TOTAL DOTS
↓ SET key
[IN6 H TOTAL DOTS]
1344DOT
↓ ESC key: Returns to the previous screen.
Note:
You can set the total number of horizontal dots only if analog RGB or analog YPbPr signals are input. You can
only display the set value for input analog video signals or digital input signals, and you cannot change the
setting. If no signal is input, you cannot set the function and the message is displayed.
[IN6 H TOTAL DOTS]
NOT AVAILABLE NOW
2. To set the total number of horizontal dots using commands:
@SHT: Set the total number of horizontal dots
@GHT: Get the total number of horizontal dots
Video signals
Horizontal
synchronizing signal
Total horizontal dots = Dots per line
[Figure 8.31] Total number of horizontal dots
Top
▲▼keys: Select "INPUT TIMING".
▲▼keys: Select "H TOTAL DOTS".
▲▼keys: Set the total number of horizontal dots.
◄►keys: Select the desired input (IN1 to IN9).
IN1 IN2
A A
A: Settable only if analog RGB/analog YPbPr signals are input.
If analog video signals are input, only the set value is displayed and you cannot set
the total number of horizontal dots.
B: Only the set value is displayed. You cannot set the total number of horizontal dots.
IN3 IN4 IN5
A A A
91
For each input port/input signal
I 6 IN7 IN8 IN9
B B B B