The Number Of Hdcp Retries [Hdcp Error Retry] - IDK MSD-5401 User Manual

8.7.9 The number of HDCP retries [HDCP ERROR RETRY]

If a display device with HDCP is connected and you set "8.7.8 HDCP output mode" to "HDCP INPUT ONLY"
or "ALWAYS", HDCP is authorized regardless of the status of input signals. Normally, set "HDCP ERROR
RETRY" to "ETERNITY" to retry the authentication automatically after the first authentication fails. However, if
you do not input signals protected by HDCP, you can set the number of retries arbitrarily. (If retry is not
succeeded even after the MSD retries for the set number of retry times, video and audio with HDCP are not
output.)
･Retry until succeeded: ETERNITY [Default]
･Not retry: 0
･Retry for the set number of retry times: 1 to 100
1. To set the number of HDCP retries using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
↓ SET key
[OUTPUT SETTING]
HDCP ERROR RETRY
↓ SET key
[OUT1 HDCP RETRY]
ETERNITY
↓ SET key
[HDCP ERROR RETRY]
NOW UPDATE...
↓
[OUTPUT SETTING]
HDCP ERROR RETRY
Note:
If you do not press the "SET" key, the number of retries is not changed. Make sure to press the "SET" key.
2. To set the number of HDCP retries using commands:
@SHR: Set the number of HDCP retries
@GHR: Get the number of HDCP retries
Top
▲▼keys: Select "OUTPUT SETTING".
▲▼keys: Select "HDCP ERROR RETRY".
▲▼keys: Set the number of HDCP retries for when HDCP
authentication failed.
◄►keys: Select the desired output (OUT1 to OUT4).
Displays the message for 1 second before automatically returning to
the previous screen.
117
For each output