Flash Time (Command Keys And Display Power Keys) [Flash Time] - IDK MSD-5401 User Manual

2. To set the lighting condition of command keys using commands:
@STL: Set command ley lighting
@GTL: Get command ley lighting

8.12.8 Flash time (Command keys and DISPLAY POWER keys) [FLASH TIME]

You can set the flash time (blink duration) of command execution keys and power switch of display devices
during command execution:
You can set the time for COMMANDs A to I and DISPLAY POWER separately.
･Blinks while a control command is being executed: EXECUTION
･Not blink: OFF
･Blinks for the specified time*: 1 to 1000 sec.
[Defaults]: For COMMANDs A to I: OFF
* If the command execution has not been completed even after the set time passes, it continues to blink until
the execution is completed.
1. To set the flash time of command keys and display power keys using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
FLASH TIME
↓ SET key
[COMMAND A]
OFF
↓▲▼keys
[COMMAND B]
OFF
▲▼keys
[DISPLAY4 POWER]
EXCUTION
↓ ESC key: Returns to the previous screen.
2. To set the flash time of command keys and display power keys using menu:
@STF: Set flash time (Command keys and DISPLAY POWER keys)
@GTF: Get flash time (Command keys and DISPLAY POWER keys)
For DISPLAY POWER: EXECUTION
Top
▲▼keys: Select "PRESET COMMAND".
▲▼keys: Select "FLASH TIME".
▲▼keys: Set the flash time of COMMAND A
(EXECUTION, OFF, or 1 sec. to 1000 sec.).
▲▼keys: Set the flash time of COMMAND B
(EXECUTION, OFF, or 1 sec. to 1000 sec.).
▲▼keys: Set the flash time of DISPLAY POWER 4
(EXECUTION, OFF, or 1 sec. to 1000 sec.).
184
MSD-54 SERIES User's Guide