PATTERN 10
7 Basic Operations
7.1 Selecting Input Channels
To select channels for outputting video or audio:
■ Procedure
Select the desired mode by the SWITCHING MODE key.
1
Every time you press the key, the mode changes sequentially as follows:
V&A (video & audio simultaneously; set by default)
VIDEO (only video)
AUDIO (only audio)
The LED of the selected mode illuminates.
OFF
Press the desired input channel selection key (IN1 to IN9, OFF) to set a channel to output video or
2
audio.
The LEDs of the selected video/audio inputs illuminate.
Command control: Switching video and audio channel simultaneously: @SSW/@GSW
Switching video channel: @SSV/@GSV
Switching audio channel: @SSA/@GSA
UNLOCK
SWITCHING MODE
V&A
[Figure 7.1] SWITCHING MODE selection key
24
MSD-54 SERIES User's Guide
COMMAND
COMMAND
A
VIDEO
AUDIO
COMMAND
B
C
MENU/SET
ESC
CO