Audio Format [Audio Format] - IDK MSD-5401 User Manual

8.9.5 Audio format [AUDIO FORMAT]

You can set the audio format and maximum sampling frequency to be output from a source device. This menu
is valid only all conditions below are met: if you select "INTERNAL EDID" for "8.9.1 EDID setting", you select
a resolution other than "UNUSED" for "8.9.3 Input resolution for AV devices [AV RESOLUTION]", and you
connect an HDMI device such as a Blu-ray recorder.
Audio format
Linear PCM
AC-3/Dolby Digital
AAC
Dolby Digital+
DTS
DTS-HD
Dolby TrueHD
1. To set the audio format using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
EDID
↓ SET key
[EDID]
AUDIO FORMAT
↓ SET key
[IN1 PCM]
MAX FREQ:48kHz
↓ ◄► keys
[IN1 Dolby Digital]
ON
↓ ◄► keys
[IN1 Dolby Digital]
MAX FREQ:48kHz
Repeat the same procedure to set the audio formats of AAC, Dolby Digital+, DTS, DTS-HD, and
Dolby TrueHD.
↓ SET key: Applies settings.
[AUDIO FORMAT]
NOW UPDATE...
↓
[EDID]
AUDIO FORMAT
Note:
If you do not press the "SET" key, the audio format is not changed. Make sure to press the "SET" key.
[Table 8.8] Audio formats
ON/OFF
Not settable
Settable (OFF)
Settable (OFF)
Settable (OFF)
Settable (OFF)
Settable (OFF)
Settable (OFF)
Default values are enclosed in parentheses.
Top
▲▼keys: Select "EDID".
▲▼keys: Select "AUDIO FORMAT".
▲▼keys: Set the maximum sampling frequency of IN1
(32 kHz, 44.1k Hz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz).
▲▼keys: Set "OFF" or "ON" for AC-3/Dolby Digital output of IN1.
▲▼keys: Set the maximum sampling frequency of AC-3/Dolby Digital
of IN1 (32 kHz, 44.1 kHz, 48 kHz).
This is displayed only if output (set in the previous screen) is set to
"ON"
The message is displayed for one second and then previous screen is
displayed automatically.
140
MSD-54 SERIES User's Guide
For each input
Sampling frequency (kHz)
32/44.1/48/88.2/96/176.4/192 (48)
32/44.1/48 (48)
32/44.1/48/88.2/96 (48)
32/44.1/48(48)
32/44.1/48/96 (48)
44.1/48/88.2/96/176.4/192 (192)
44.1/48/88.2/96/176.4/192 (96)